J & C Enterprises Reviews

Great service, only quality cylinder head machine shop anywhere near here. Installed many heads from here with excellent results.

Good guys to talk with and great work I've used there heads for over 5 years with no problems. If there is a problem they stand behind the work and make it right.

Say away!!! Bought a pair of heads from J&C as part of a $2500 engine rebuild. The first head dropped a valve seat due to a crack in the "rebuilt head" which in turn broke the piston in that cylinder so I had to drop the front suspension to replace the piston, and the head. Then 6 months later THE OTHER HEAD FAILED!! The guide on intake valve on number 5 came loose and jammed up so that the intake valve wouldn't close. What a nightmare. I had to dump the truck as a non-runner for a low price. This lousy pair of heads cost me 5 grand in losses . If you are smart, you will find someone else to do your work.

Will never use these people again. Bought a head off this dirt bag for $420 and they didn't even send all the seals with it. We Hooked it up to the motor and it didn't work right. Tried to send it back and the guy said just keep running it. We did that and nothing. Do not use this place.

bought 2 heads for liberty right side was done poorly and badly valve opens but wont close bend three time try to explain the people there they blame me for wrong timing that was not the case they were nasty people were not ready accept their fault i have 25 jeep experience and all latest training they mock me saying i need new training where as i teach the chrysler program i have to do job three time has spend extra money on head ans coolant and oil valves lifters gaskets i just want make sure other shops should not waist their time and money plus they were ignorant rude blame me for their own faulty work not big deal ahve seen brand new parts bad right from box but people people exhange them no problem but bad thing was this they tell need traing but i think the fact of the matter is this its joke ( where they located they should be in coal mine mining coal not dealing with sofisticated stuf like cylinder heads lololo) so please be very carefull dont waist money and time their other people and shops does great work i just made mistake because i need quicker but turned out to be nightmare never seen such bad work and very unprofessional people

Ordered a 4.0 jeep head and was very impressed on the quality of work

I own a used car dealership and I happened to luckily run across these guys on eBay and saw they were local to me and I ve ordered numerous heads from them and I have never been disappointed with anything. Highly recommended..

DO NOT deal with these people. I purchased a cylinder head for a Volkswagen Beetle and after being talked to like a child, they sent the head machined incorrectly. All four spark plug holes had to be reworked (inserts added) because the original hole threads were machined at a horrible angle. You've been warned.