It is genuinely refreshing to find a company that understands the specific challenges of cooling AI data centers in India so well. Reading through the information on DataCool’s website, it is clear they have focused deeply on this niche. They do not try to be everything to everyone; instead, they offer a very clear path from consulting to integration and finally to supplying the necessary parts. The distinction between air cooling limits and liquid cooling capabilities is explained with impressive clarity. Knowing they handle everything from thermal sizing to post-go-live support means a client only needs one partner for the entire process. The fact that they are based in Chennai but cover sites across India is a strong point for national projects. Their approach seems tailored to help operators choose the right liquid cooling strategy without unnecessary complexity. It feels like a mature, engineering-led service rather than just sales pitches.
Questions about DataCool Technologies
What is DataCool Technologies?
DataCool Technologies is a Chennai-based company that provides cooling solutions for AI data centers. They offer thermal consultancy, supply equipment like coolant distribution units and immersion tanks, and integrate systems on site. Their services support rack densities of 30–130 kW using direct-to-chip, rear-door heat exchanger, or immersion cooling methods.
What specific products and services does DataCool Technologies provide?
The company targets AI data centers in India where modern GPU racks exceed 30 kW, which air cooling cannot handle effectively. They supply cold plates, CDUs, manifolds, and rear-door heat exchangers selected for specific platforms. System integration includes installation, filling, commissioning, and post-go-live support for facility loops.
How does the process of getting cooling solutions from DataCool Technologies work?
Their thermal consultancy includes heat-load assessment, cooling design review, and CDU sizing before purchase. The supply phase involves selecting cold plates and CDUs tailored to the customer's platform. System integration covers procurement, installation, commissioning, and ongoing support as a single partner.
What cooling approaches and densities does DataCool Technologies support?
They support rack densities up to 130 kW using direct-to-chip cooling, rear-door heat exchangers, or immersion cooling. The facility loop connects rack cooling to the facility water system and heat rejection plant. Cold plates, pumps, and plumbing are used for direct-to-chip loops on dense AI racks.
Where is DataCool Technologies located and what is their service region?
The company operates in India with a typical lead time of three to five weeks for their services. They are based in Chennai, Tamil Nadu, and conduct site visits across India. Their service region is India, and they advise on cooling approaches and integrate systems on site.
What performance metrics and PUE targets does DataCool Technologies claim for their cooling systems?
Their cooling systems can achieve a target PUE of ≤ 1.15 in tropical climates, compared to air cooling which has a PUE of 1.5–1.8. The reference cooling loop operates with a supply temperature of 32 °C and a return temperature of 48 °C. Liquid cooling supports densities of 30+ kW per rack, capturing up to 95% of heat.
What are the response times and contact policies for DataCool Technologies?
The company's website states they will respond to consultation requests within 48 hours. They offer a typical lead time of three to five weeks for their services. The footer mentions they only use contact details to respond to enquiries and do not sell or share them.
What problems with air cooling do reviewers highlight that DataCool Technologies addresses?
Some reviewers note that air cooling tops out around 15 kW per rack, failing at modern GPU density. Liquid cooling is described as the only path that scales for sustained full load on dense GPU racks. Hot spots above 12 kW cause throttling under training load with air cooling.
What makes DataCool Technologies different from competitors according to their own words?
The company does not sell servers or racks; they focus solely on cooling. They get heat out of AI halls and provide nationwide coverage based in Chennai. Their thermal engineering involves rack heat loads, coolant conditions, hydraulic sizing, and facility readiness.
What key features and values does DataCool Technologies emphasize?
The website mentions they are focused on cooling and based in India. They provide a single partner solution for procurement, install, commissioning, and post-go-live support. The company aims to inform every selection with thermal engineering expertise.
What is the official website of DataCool Technologies?
The official website of DataCool Technologies is datacool.org.
How is DataCool Technologies rated on Trustburn?
On Trustburn, DataCool Technologies has a rating of 3.8 out of 5 based on 4 reviews.
Post your question publicly — other visitors, and whoever manages this page, can answer. It will be visible on this page.
Want to hear about this company again? Follow it and we’ll email you when a new review appears.
Based on reviews, listing data and the company's website. Verify anything important with the company directly.
I am impressed by the range of cooling options available! The ability to get quick consultations for AI halls is fantastic for planning.
DataCool Technologies offers a focused approach to cooling for AI data centers. Their expertise in liquid cooling seems well-suited for high-density environments. The team appears knowledgeable and ready to assist with consulting and integration needs across India.
From the information available, DataCool Technologies presents a clear value proposition for AI data centers in India, focusing on liquid cooling solutions for high-density racks. However, the website lacks concrete evidence to fully substantiate their claims of superior performance. While they mention supporting densities up to 130 kW per rack, there is no detailed breakdown of specific hardware brands used or independent third-party validation of their PUE targets. For a critical infrastructure decision, I would want to see more transparent data on their supply chain and past project metrics before committing.
Questions & Answers
No questions yet — be the first to ask.
Sign in to post
Your text is saved — you'll come right back to post.
Don't have an account? Create one
News & Press
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
About DataCool Technologies
DataCool Technologies is a Chennai, India-based company that provides cooling solutions for AI data centers. It advises on cooling approaches, integrates systems on site, and supplies equipment such as coolant distribution units, manifolds, rear-door heat exchangers, and immersion tanks. The company supports rack densities of 30–130 kW using direct-to-chip, rear-door heat exchanger, or immersion cooling methods. Its service region is India, with a typical lead time of three to five weeks.
- Website
- datacool.org
- Phone
- +91-9176946300
- [email protected]
- Address
- Chennai, Tamil Nadu, IN
