Free Cut List Optimizer & Linear Cut Calculator

Free Cut List Optimizer & Linear Cut Calculator

3.8 5 Reviews
Haven't used Free Cut List Optimizer & Linear Cut Calculator yet?
Ask Trustburn

Questions about Free Cut List Optimizer & Linear Cut Calculator

Based on 5 reviews, listing data and website checks · updated 3 days ago

What is Free Cut List Optimizer & Linear Cut Calculator?

Free Cut List Optimizer & Linear Cut Calculator is a web-based tool for woodworkers and builders that calculates the most efficient way to cut lumber. Users enter stock board lengths, blade kerf, and a list of required cut sizes, and the tool returns the minimum number of boards needed along with a visual cutting plan. It runs a packing algorithm in the browser that sorts pieces from longest to shortest and accounts for blade kerf on each cut to reduce waste.

How does the packing algorithm determine the number of boards needed?

The tool uses a First-Fit-Decreasing algorithm that sorts parts longest first and puts each into the first board with enough space. This fast method does not prove that the board count is the absolute minimum but reserves one kerf for each finished part. The output is an estimated allocation of straight parts to stock boards.

Is there a cost to use the calculator and do I need to create an account?

The calculator is free to use, requiring no login or email, and is positioned for DIYers, woodworkers, and builders. Everything runs in the browser using a First-Fit-Decreasing packing algorithm that respects your blade kerf. The tool works on your phone in the workshop as well as on a desktop.

Which types of materials are suitable for this calculator?

The tool works for straight lumber, trim, pipe, and bar stock of one stock length and one cross-section per calculation. It is designed for one-dimensional cuts where all pieces share a cross-section and need to be cut to length. Sheet goods, angles, and mixed material sizes require a different tool or separate runs.

How does blade kerf affect the final cutting plan?

The calculator puts three on the first board and one on a second when cutting four 24-inch pieces with a 0.125-inch kerf per piece. A small kerf can change the shopping list because the saw removes material, so 96 inches of parts require 96.5 inches of stock. The diagram shows the order of parts along each board and the remaining offcut.

What does the visual blueprint feature show?

The visual blueprints show exactly where each cut lands and where the scrap falls, including hatched regions for remaining offcuts. The cutting blueprint displays board-by-board lengths and a material balance so results can be checked against actual lumber prices. The tool provides an estimated layout for one stock length, not a guaranteed minimum.

How does the tool handle data privacy and storage?

The tool is 100% client-side, meaning calculator inputs are not uploaded and your cut list stays in the browser. Real-time, client-side recalculation happens as you type, so there is no waiting or server dependency. The website says it is 100% free with advertising helping support the site.

What is the business model behind the tool?

The tool is a small, independent project built to be the simplest cut optimizer on the web. It takes the opposite approach of most cut list optimizers by avoiding logins, paywalls, or clunky interfaces. The calculator is free to use, with advertising helping support the site.

What is the current rating and review count on Trustburn?

The Trustburn rating is 3.8 out of 5 from 5 reviews. The tool is described as free, requiring no login or email, and is positioned for DIYers. The listing description mentions sample inputs such as 6, 8, 10, and 12 foot boards and outputs indicators like total cuts, waste percentage, and a cutting blueprint.

What factors are excluded from the automated calculation?

The optimizer reserves one kerf for each finished part and waste includes both kerf and offcuts. Defects, end trimming, grain matching, angled cuts, and joining allowances must be handled in your measurements. The guide explains how to prepare measurements and compare stock lengths.

How does the tool handle defects and trimming?

The calculator puts three on the first board and one on a second when cutting four 24-inch pieces with a 0.125-inch kerf per piece. The model reserves one blade kerf per part and does not inspect defects automatically. The tool works for straight lumber, trim, pipe, and bar stock of one stock length and one cross-section per calculation.

How can I contact Free Cut List Optimizer & Linear Cut Calculator?

You can reach Free Cut List Optimizer & Linear Cut Calculator by e-mail at [email protected].

What is the official website of Free Cut List Optimizer & Linear Cut Calculator?

The official website of Free Cut List Optimizer & Linear Cut Calculator is boardcutcalc.com.

Based on reviews, listing data and the company's website. Verify anything important with the company directly.

Sarah Jenkins
Reviews 1

From the information available, Board Cut Calc offers a robust solution for linear cut list optimization. The tool utilizes a First-Fit-Decreasing algorithm that efficiently sorts required pieces to fit into the fewest boards possible. Notably, it subtracts blade kerf on every cut, which ensures that the calculated board lengths remain accurate and prevents material waste due to saw thickness. The interface is designed to be mobile-first, allowing professionals to use it conveniently on a phone propped against a saw or on a desktop in the workshop. Since all calculations are performed client-side, the tool remains functional even without an internet connection, which is particularly useful in lumber yards with spotty Wi-Fi. The absence of a registration requirement or upsell mechanism makes it a straightforward, no-friction option for woodworkers and builders who need immediate, reliable results without navigating complex enterprise software.

David Miller
Reviews 1

I love that I can just open the page and start typing without any login hassle. The mobile layout works great on my phone while I am at the store.

Martha Higgins
Reviews 1

The Board Cut Calc interface stands out for its intuitive design, particularly how it handles the First-Fit-Decreasing algorithm to minimize material waste. Reading the available information, it becomes clear that the tool accounts for blade kerf on every single cut, which is a critical detail often overlooked in simpler calculators. This ensures that the visual cutting blueprint accurately reflects real-world consumption, preventing the common error of parts ending up slightly too short. The fact that everything runs client-side means the tool remains fast and responsive, even on mobile devices in areas with poor connectivity, such as a lumber yard. For woodworkers and builders who need to forecast supply spend accurately, this free tool offers a reliable way to determine the minimum number of boards required without the hassle of creating an account or dealing with a paywall. It effectively replaces mental Tetris with precise, kerf-accurate packing, making it a valuable asset for both framing projects and custom lumber work.

Elias Thorne
Reviews 1

While the calculator works well, the lack of explicit pricing for premium features creates uncertainty for professional users needing advanced export options.

Questions & Answers

No questions yet — be the first to ask.

News & Press

No news yet. This is where the business shares its own updates and press.

Photos

No photos yet. Photos shared by reviewers will show up here.

Widgets

Boost your business trust by displaying widget on your website — its a simple way to convert your visitors into customers.

Embed code

<script src="https://trustburn.com/widgets/index.js"></script>
<div class="trustburn-widget" data-trustburn-protocol="https:" data-trustburn-domain="trustburn.com" data-trustburn-widget="score" data-company-path="boardcutcalc-com" data-lang="en"></div>
More widgets

About Free Cut List Optimizer & Linear Cut Calculator

Free Cut List Optimizer & Linear Cut Calculator is a web-based tool for woodworkers and builders that calculates the most efficient way to cut lumber. Users enter stock board lengths, blade kerf, and a list of required cut sizes, and the tool returns the minimum number of boards needed along with a visual cutting plan. It runs a packing algorithm in the browser that sorts pieces from longest to shortest and accounts for blade kerf on each cut to reduce waste. The page shows sample inputs such as 6, 8, 10, and 12 foot boards and outputs indicators like total cuts, waste percentage, and a cutting blueprint. The tool is described as free, requiring no login or email, and is positioned for DIYers and woodworking projects.