Great people but a hassle to get here. From 90/94 exit Pershing going west. Make a left on Ashland and a right on 43rd. Take that to wolcott and go south. When you check in make a left on 44th and back into the dock or back enough so you face north on wolcott. From that point not easy but not impossible either. Good luck
47th east then make a left on wolcatt is probably the best way to take if you're in a semi.. Streets are too tight to make a right turn also don't try to come down from 43rd 1. You won't be able to blindside 2. Chances are they will make you go around so you don't blindside.. Watch for cars! They won't watch for you! Other then getting in and out the place is good unloaded in under 30 min ones in the dock
Backing is really tight in this place. Plus you have cars all around you standing and passing you.
Come from 47 th street only.
When backing in turn right to 44th street then back in to dock. It s not too easy but u can get it just be careful
Shipper guy had a bit of an attitude. Tight spot to back into. Tip, move your tandems all the way to the back, it will help you.
Definitely a tight spot. The roads aren t made for trucks. If you don t have experience backing I wouldn t even try to come to this place. A lot of cars and have to block traffic to back into spots. People are friendly here though.
No parking over night or anywhere near customer
You can take Ashland Ave and go west on 44th street to Wolcott or take 47th street make sure you are traveling eastbound on 47th then turn left into Wolcott it s a residential street don t worry you will clear the power lines , building is on the west wide of Wolcott street so don t attempt to blind side in, its a residential street, check in by dock 5, be patient and be prepared to use ur trucking skills.
cedarconcepts.net
