What reviewers say about Brownlow Engineering
What does Brownlow Engineering do?
A.R Brownlow Ltd is Ireland’s leading supplier of Toolroom and engineering supplies.
Are there any complaints about Brownlow Engineering?
The critical reviewers wrote that they experienced issues with pricing discrepancies, a restrictive website for non-registered users, and poor service regarding card payments.
AI-generated from reviews on this page. Verify anything important with the company directly.
Excellent staff...Excellent service...And a great range of products in store.
Unlimited stock . Great customer service . Good advice . Value for money
Excellent place i run a garage anx use the place a lot. Staff know there stuff too.
Excellent central location and helpful friendly staff
I went to the Brownlow website hoping to see details of a range of castors, but the 'catalog' is not available to non registered users. There were no instructions about how to register. The website visit was annoying and a waste of time.
Need to know what you want here. No a place for browsing.
A real trade style business. You can go in as a regular guy but you get trade level service.
Always love a specialist shop. But another one that doesn't put prices on most of their stock.
I went in looking for some hinges/latches to make a case and the prices that they did show for small, unsprung, basic latch ( 4.50) seemed way too high. Hate to say it but you can get 4 sprung latches for 9.99 on Amazon.
I will be returning however as it's an interesting shop that could probably help you out. I don't mind paying extra if you get the extra service
Popped into Brownlows to buy two locking nuts 13mm and one grub bolt. These would cost around 9c each for the nuts in the Co Op superstore and 25c for the bolt, but I needed them straight away and Brownlows was near by.
They charged 2 and thats fine no problem.
But when I went to pay by card as I did not have change the guy serving me told me it was ridiculous to come to a shop and not to be able to pay and had a good rant, firstly I did pay, secondly it's the 21st century most people don't carry cash.
The visa debit service charge for this transaction would be 0.1% which I would have happily paid even though I had been well over charged anyhow, yet this ignorant man thinks its ok to be ignorant and rude to a customer over 0.1% from a 2 sale!
Put a notice up if you don't accept card under a certain value and don't be so ignorant! The transaction fee was well covered having been well over charged for 3 nuts! I'll go elsewhere in the future. They seem to forget I spent 200 on a tool set the week before never again! Avoid!
Unless of course you like being spoken to like a piece of s##t! I have delt with some of the other lads in here and there grand, but this curly grey haired ignorant tw#t needs to learn some manners!
Been going here for years, extremely helpful staff with honest opinions and advice on what they sell. Maybe a little more expensive on some items but that s because they maintain in stock pretty much any engineering parts or tools you might want. Especially good for trailer parts and can even fabricate parts to order.
Great service always have the parts we need to keep the kranzle washer going
I would gladly recommend AR Brownlow to anyone needing parts, my experience and help from Declan Murphy in sales was brilliant. He double checked measurements and made sure I got the correct parts. Great company to deal with.
On the expensive side, but for occasional minor purchase it's very convenient.
I asked the price of a tool to one guy he said 3 E, then I went to pay to another guy and he said 7 E, probably because he noticed that I was not Irish. When I said that the other guy told me another price, he apologized and he made me pay 3 E. THIEVES
My family business (was) metal fabrication, so it great to see good service from Curley & and staff on my trailer.
Very reasonable (professional) prices.
If you want a cheap job, go elsewhere!
Very obliging to me with my idea's
They will listen to any requirements and make suggestions without offending.
A very down to earth engineering firm & staff.
Thanks guys
Michael
Paid twice as much as anywhere else for a cavity wall anchor setting tool. There's no way these things are worth over 38 euro!
A bit expensive but they have everything from an anchor to a needle.
Fantastic customer service. You can as a novice ask them any question and they don't make you feel like an idiot just for asking the question. They have a huge range of equipment and if you don't see what you want or just need advice on the correct tool, just ask. They are my go to place for any tools I need. Good prices too.
Great shop for tools and tooling for machines like lathes and Mills.
Robbery shop, you would get tools twice cheaper a cross the road, and much better quality.
Very helpful staff, great selection of unusual sized nuts and bolts
News
No news yet. This is where the business shares its own updates and press.
Photos
Widgets
Get the widget for your site →About Brownlow Engineering
A.R Brownlow Ltd was set up in 1937 and has grown into Ireland’s leading supplier of Toolroom and engineering supplies since then.
Brownlow Engineering: Ireland's Leading Supplier of Toolroom and Engineering Supplies
A.R Brownlow Ltd, trading as Brownlow Engineering, is a family-owned business that has been providing high-quality toolroom and engineering supplies to customers in Ireland since 1937. Over the years, the company has grown into one of the leading suppliers in the country, offering a wide range of products and services to meet the needs of its diverse customer base.
At Brownlow Engineering, we pride ourselves on our commitment to quality and customer service. We understand that our success depends on our ability to provide our customers with reliable products at competitive prices. That's why we work hard to source only the best materials from trusted suppliers around the world.
Our product range includes everything from cutting tools and abrasives to measuring equipment and safety gear. We also offer a comprehensive selection of machinery for metalworking, woodworking, plastics processing, and more. Whether you're looking for hand tools or CNC machines, we have what you need to get your job done right.
In addition to our extensive product range, we also offer a variety of value-added services designed to help our customers save time and money. Our experienced team can provide expert advice on product selection and application as well as technical support for all types of machinery.
We also offer custom tooling solutions tailored specifically to your needs. Our state-of-the-art manufacturing facility is equipped with advanced CNC machines capable of producing high-precision parts quickly and efficiently. Whether you need a single prototype or thousands of parts for production runs, we can deliver exactly what you need when you need it.
At Brownlow Engineering, we are committed not only to meeting but exceeding our customers' expectations every time they do business with us. We believe that by providing exceptional service at every stage of the process – from initial inquiry through delivery – we can build long-lasting relationships based on trust and mutual respect.
If you're looking for a reliable supplier of toolroom and engineering supplies in Ireland or beyond, look no further than Brownlow Engineering. With over 80 years' experience in the industry combined with an unwavering commitment to quality and customer service excellence – there's no better choice than us!
- Website
- arbrownlow.ie
- Phone
- +353214313377
- sales@arbrownlow.ie