The Bluetooth connection to the controller is seamless and reliable for real-time monitoring.
Questions about BITI Dash
What is BITI Dash?
BITI Dash is a software application that connects to a vehicle's controller via Bluetooth to display real-time telemetry like motor RPM, power, torque, and battery voltage. It includes a wheelie-assist feature using an onboard IMU to hold a set pitch angle and a GPS performance module for recording acceleration runs. The app allows users to calibrate the GPS, run timed launches, and post results to a leaderboard for comparing bikes and tunes.
How does the wheelie-assist feature work?
The app features a wheelie-assist system that reads the bike's pitch angle from an onboard IMU and applies torque to maintain a user-set angle during a wheelie. Users can set the target angle and band in the Tune tab, then save the settings to the bike to enable the assist. The system requires the IMU to read online for the assist to function properly.
How do I use the GPS performance module?
To record performance data, users must first calibrate the GPS by coming to a stop and arming the module. Once calibrated, the app automatically starts timing on movement, allowing users to launch and record acceleration runs. After a run, users can export the performance slip or post the results to a leaderboard to compare with other bikes and riders.
What data does the dashboard display?
The dashboard displays multiple live gauges including motor RPM, output torque, phase current, throttle percentage, and live angles. Users can also view session peaks, battery amps, and pack voltage alongside motor and controller temperatures. All telemetry channels are captured per sample at a configurable sample rate, with fault records stored in the controller's flash memory.
How does the tuning process work?
The Tune tab allows users to edit 272 parameters, with each parameter indexed by reg = index × 2. Users can backup their current tune as an .xlsx file before making changes, and edits apply live until saved to the bike's flash memory. Editing the tune carries risks of permanently damaging the motor or controller if done incorrectly.
What file formats are supported for tune files?
The app supports importing and exporting tune files in .dtune or OEM .xlsx formats. Users can also perform a safe write self-test and update firmware through the advanced options. All changes are read-only until the user explicitly enables writing, which writes values one at a time with confirmation.
What safety warnings are given during tuning?
The dashboard includes a section for bus voltage and current, as well as live temperature readings for both the motor and controller. Users can toggle between read-only browsing and writing modes to safely inspect or modify the bike's configuration. Editing the tune is done at the user's own risk, with a warning that improper changes can damage the hardware.
How does the leaderboard feature work?
The app provides a leaderboard where users can compare bikes, tunes, tires, and riders based on acceleration runs. Users can refresh the leaderboard to see updated rankings and post their own results to compete with others. The leaderboard allows for direct comparison of performance metrics across different vehicles.
What metrics are tracked during a wheelie?
The dashboard displays a wheelie hang time counter and a best wheelie metric that tracks the highest angle achieved. Users can reset the best wheelie after each attempt and view the session peak angle. The system also shows the live angle and lift torque in real-time during a wheelie.
How are fault records handled?
The dashboard includes a fault record viewer that stores live snapshot freeze-frames in the controller's flash memory. These records are read-only and provide a full snapshot of the system state at the time of a fault. Users can review these records to diagnose issues without altering the stored data.
What backup options are available?
The app allows users to backup their current tune before making any changes to ensure they can restore it if needed. Users can also export and share their tune files with others for comparison or collaboration. The backup feature is essential for protecting the bike's configuration during tuning sessions.
What trip and session data is shown?
The dashboard displays a trip meter and odometer reading alongside the live telemetry data. Users can view the current speed and peak speed achieved during a session. The app also shows the elapsed time and duration of the current run.
How do I calibrate the GPS module?
The app includes a dragy GPS performance module that requires calibration before recording runs. Users must arm the module and wait for the tree to go green to start timing automatically. The module allows for precise measurement of acceleration and performance metrics.
What is the official website of BITI Dash?
The official website of BITI Dash is bitidash.com.
How is BITI Dash rated on Trustburn?
On Trustburn, BITI Dash has a rating of 4 out of 5 based on 4 reviews.
Post your question publicly — other visitors, and whoever manages this page, can answer. It will be visible on this page.
Want to hear about this company again? Follow it and we’ll email you when a new review appears.
Based on reviews, listing data and the company's website. Verify anything important with the company directly.
The Bluetooth connectivity provides immediate access to detailed telemetry data, which is great for monitoring performance. However, the warning about potential brick damage during firmware updates suggests that users need to be cautious. The interface is clean, but the risk factor for less experienced riders is a valid concern when adjusting critical parameters.
While the core app is accessible, the pricing for unlocking full tuning features at twenty dollars and adding edit capabilities at five dollars seems somewhat fragmented compared to all-inclusive competitors.
The Bluetooth pairing with the controller feels reliable and the interface displays all necessary telemetry data clearly for monitoring ride performance.
Questions & Answers
No questions yet — be the first to ask.
Sign in to post
Your text is saved — you'll come right back to post.
Don't have an account? Create one
News & Press
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
About BITI Dash
BITI Dash is a software application designed to connect via Bluetooth to a vehicle's controller, likely an electric motorcycle or similar motorbike. It provides a real-time dashboard that displays live telemetry such as motor RPM, power, torque, throttle percentage, battery amps, pack voltage, and motor and controller temperatures. The app includes a wheelie-assist feature that uses an onboard IMU to read the bike's pitch angle and apply torque to help hold a user-set angle during a wheelie, along with a GPS performance module for recording acceleration runs. Users can calibrate the GPS, run timed launches, export performance slips, and post results to a leaderboard for comparing bikes, tunes, and tires. Settings such as the wheelie-assist PID parameters are adjusted through a separate Tune tab and saved back to the bike.
- Website
- bitidash.com
- Categories
- Computer software, Automotive
