ElectroPeak’s device is straightforward to set up, but I have a concern about the temporary open access point during startup—it feels like a security risk. Also, the price seems high compared to similar products. According to their support, the cost reflects the purchase price plus shipping and customs duties, but it still feels steep.
What reviewers say about ElectroPeak
What is ElectroPeak?
ElectroPeak is a information technology and services listed on Trustburn. ElectroPeak is an online store that sells electronics and robotics components for hobbyist and prototyping projects.
How can I contact ElectroPeak?
You can reach ElectroPeak by phone at +8618126402859 or by e-mail at info@electropeak.com.
What is the official website of ElectroPeak?
The official website of ElectroPeak is electropeak.com.
How is ElectroPeak rated on Trustburn?
On Trustburn, ElectroPeak has a rating of 4.4 out of 5 based on 179 reviews.
AI-generated from reviews on this page. Verify anything important with the company directly.
ElectroPeak delivers high-quality components, and this module is no exception. I recently modified its current draw from 1A down to 0.5A by simply adding a 1N4007 diode to the positive input line, which worked perfectly. Highly recommended for anyone looking for reliable parts.
ElectroPeak was quick to address the discrepancy in the product photo regarding the shunt. I asked if the model included an integrated shunt up to 10A to avoid needing a separate one, and they confirmed the listing has been updated. Thanks for the prompt correction!
ElectroPeak saved the day! I ran into an upload issue and realized I just needed to select the ATmega328P with the Old Bootloader option. Worked like a charm right away. Solid support for hobbyists.
I’ve been using this power supply from ElectroPeak and the stability is impressive. I started by connecting it to a 12V adapter, and it held a steady 5V. Even when I switched to a 19V laptop adapter, the output remained perfectly locked at 5V. This consistency is a game-changer because you never have to stress about voltage fluctuations damaging your gear. Plus, its range is incredibly versatile, offering everything from 1.5V to 18V when running without a load.
I recently purchased a GSM800L module from ElectroPeak and found it to be a cost-effective option for my project. While the power supply aspect is often cited as the module's main drawback, I managed to stabilize it by using a 2596 DC-to-DC converter, which resolved the issue. I also noted that the SIM card slot is designed differently compared to other modules I have used, which took a moment to get used to. Overall, it is a reliable and efficient piece of hardware.
Shipped from ElectroPeak in good condition. The module performs as expected, maintaining a stable 2.4V offset (close to the theoretical 2.5V). This consistency is actually a plus since the offset needs to remain constant and avoid fluctuations, which is crucial because microcontroller analog ports typically can't handle negative values.
ElectroPeak delivered exactly what I needed. This component works flawlessly, making it easy to integrate with Wi-Fi and start coding right away. The communication with the system is seamless and reliable. Highly recommended!
The setup process at ElectroPeak is straightforward. The device handles 3.3V boards like the STM32F103C8 (Blue Pill) without issue. However, the accuracy leaves something to be desired, making calibration a bit of a headache. The middle point shifts depending on whether you are just touching or pressing down, so you need to calibrate for both normal and pressurized modes. For a better experience, I recommend prioritizing smoothness over precision by rounding the coordinates.
Just got my order from ElectroPeak and I’m really impressed. The attention to detail was spot-on, from the neat packaging of the accessories to the thoughtful extras like the brochure, gift notebook, and return slip. It’s clear the team truly respects their customers. Well done!
I couldn't find the item I was looking for on ElectroPeak's website when I visited. The support team was quick to respond, confirming that the product is coming soon. Good communication, but I couldn't make a purchase just yet.
ElectroPeak is a reliable choice for anyone looking for practical gear. Nothing flashy or groundbreaking here, but you get solid value and utility for your money. It’s a straightforward, no-nonsense experience that gets the job done.
ElectroPeak nailed it with this board. You get a powerful processor and blazing-fast Wi-Fi connectivity for a really low price. I also appreciated the built-in WebSocket support, including server capabilities, which covers almost all the Node essentials. My only gripe is the lack of a native USB port, which prevents using it as a keyboard dongle, but that’s a minor trade-off since connecting to a laptop via serial (using Python’s pySerial) works perfectly fine.
ElectroPeak delivers exactly what they promise. The interface is intuitive and incredibly versatile, making it a go-to solution for a wide variety of needs. Highly recommended for anyone looking for reliability and ease of use.
I’m really impressed with ElectroPeak’s balance of quality, pricing, and customer service. I picked up an Arduino Mega for my 3D printer project. While I’m still working on it, the community feedback confirms that this board is a top choice for printers, especially thanks to the affordable and easily replaceable USB converter. Highly recommend!
My experience with ElectroPeak was fantastic. They provided clear technical details on the various ATMega328 options, which really helped me choose the right chip. Whether you are looking for the classic DIP package or the surface-mount versions like those found on Arduino UNOs, Lilypads, or Nanos, they have the right solution. The variety and accuracy of their microcontroller inventory make them an easy choice for anyone building their own projects. Highly recommended!
ElectroPeak’s voltmeter is straightforward to operate, but getting the ammeter to work right takes a bit of attention. You have to ensure the thick wires are in the negative part of the circuit, in series with the main Gnd, and that the thin black ground wire connects specifically to the ammeter’s thick black wire. If you don’t get these connections right, the module won’t function properly.
I’d give ElectroPeak a 3-star rating. The build quality feels a bit lacking. While the voltage display functions correctly, the ammeter seems to be defective. I suspect the issue lies in the wiring, as the ammeter’s cables were connected in series on the negative path.
I was finally able to secure this part from ElectroPeak after checking everywhere else. It was in stock and priced fairly. Thanks for the help!
ElectroPeak's keypad offers a distinct advantage with its keyboard-like switches, which are reminiscent of standard keypads. However, the overall quality feels just okay, scoring a 3 out of 5.
I spotted this ElectroPeak gadget online and liked its affordable, practical design, so I decided to grab it from electropeak.com alongside some other parts. Unfortunately, the unit arrived damaged. When I submitted a video proof of the defect, they claimed it wasn't their fault. It’s a shame because a reputable store like this one should at least respect its own return policies.
I left a moderate rating because of a discrepancy in the product details. The title states a capacity of 1 kg, yet both the description and the manufacturer’s website list it as 780 grams. Since I bought two units from ElectroPeak based on the title, I ended up with 440 grams less capacity than I was counting on. It would be helpful if the title were corrected to match the actual specifications.
ElectroPeak delivered exactly what I needed. While not the highest-end precision tool, it performs exceptionally well as a reliable tester. Highly recommended for the job!
ElectroPeak sent me a module that doesn’t match the product photos. It features an FP5139 switch chip rather than the advertised LTC1871. Because of this component difference, I couldn’t control the current properly.
ElectroPeak’s Mega Microphones are hands down the most powerful ones I’ve ever used. I’m planning to order a large quantity. I just need to know when they’ll be back in stock.
ElectroPeak’s device has a bit of a mixed bag when it comes to build quality. The frame feels pretty flimsy, which is disappointing, but the functionality makes up for it. Wiring is straightforward once you know the trick: just hook the thin black and red wires to 5V to power it up. For voltage readings, the yellow wire is flexible and can go almost anywhere. If you need to measure current, though, you’ll have to route the thicker wires through the negative sections of the circuit. It’s a decent tool, provided you don’t mind the cheap-looking housing.
I’ve ordered over twenty modules from ElectroPeak, and every single one has been flawless. They connect to Windows without a hitch, though I suppose your own technical know-how plays a role in how smoothly things run. Overall, I’m very happy with the product’s reliability.
I’ve noticed a significant price hike at ElectroPeak. While I used to appreciate the reasonable rates, the current costs seem higher than what’s available elsewhere. I stuck with your brand because I trusted the quality, but the increased prices are making me reconsider. If ElectroPeak can match competitors’ prices through its guarantee policy, it would really help retain customers like me who value both product quality and affordability.
Three stars for ElectroPeak. I was a bit confused by the product description claiming the board doesn't need an external I2C module, but I couldn't find clear specs on which pins handle that. I posted a few specific questions in your forum about using I2C with two wires, setting it up in Arduino and NodeMCU, and how the SPI and ICSP ports work with NodeMCU. The response I got was pretty generic, just telling me to check the forum or the product page Q&A section again. It felt a bit like a standard template response rather than a direct answer to my technical details.
I appreciate that ElectroPeak included an ICSP port on this module for syncing with other boards, but the experience is let down by a lack of guidance. It would be great if you could provide dedicated training materials, programs, or libraries to help users get the most out of this feature. Thanks for considering this request.
I’m really happy with my purchase from ElectroPeak. The setup on the Raspberry Pi pins was straightforward, and the lighting quality is excellent. Highly recommended for a 5-star experience!
ElectroPeak really nailed the design on this tester. It’s impressive how they managed to squeeze out the best performance using such straightforward techniques. Big kudos to the whole team for this well-executed product.
ElectroPeak delivered exactly what was promised. The hardware is top-notch, and the assembly feels incredibly smooth. I really appreciated the attention to detail during the purchase process. Five stars!
ElectroPeak delivers excellent value for money. The circuit board is well-made and feels very durable. Definitely a quality product at a fair price.
ElectroPeak really delivered on quality with this pump. It runs incredibly quiet—only a whisper if you press it right against your ear. I’ve only had it for a short while, but so far, the build quality feels solid and reliable.
The focus on ElectroPeak's cameras is quite adjustable; if the image gets a bit blurry, you can simply rotate the lens to sharpen it. It’s a handy feature that works well. Thanks for the product!
I purchased two of these modules from ElectroPeak and they have been working perfectly. You won't find a better price than theirs anywhere else!
I’m giving ElectroPeak three stars because the product description didn’t seem to match what I expected. It looks like they pulled the details directly from the manufacturer and their technical team, but I’d appreciate it if they could double-check for any specific discrepancies in the future.
ElectroPeak delivered exactly what I needed for my voltage reduction project. The unit is highly efficient and works perfectly. Five stars for a job well done.
ElectroPeak delivers solid build quality, but there is a crucial detail to keep in mind: the current sensing circuit isn't isolated from the power supply. You really need to install the ammeter on the negative wire. If you miss that step, the module is likely to burn out.
I see what others mean about the build quality—it’s definitely sturdy. However, the precision leaves a lot to be desired. I didn’t catch the issue on day one, but after two weeks of use with ElectroPeak, the right-hand spindle operated smoothly while the left one was completely off-target and stuttered in stepper mode. Worse yet, on some PWM settings, it stopped working entirely.
ElectroPeak delivers excellent value. Their nuts are superior in quality compared to what you find elsewhere, and the pricing is very fair.
Thanks, ElectroPeak! Just a quick tip for anyone debugging: make sure to double-check your potentiometer settings. It didn't register on my LCD initially, but a small adjustment fixed the issue. Appreciate the support!
ElectroPeak delivers solid performance with minimal current loss. While the build quality is reliable, a USB-C port would be a nice addition.
ElectroPeak delivered the order promptly. Highly recommended for reliable service!
ElectroPeak delivers a solid, practical device with good performance. However, it falls short of being the ideal tool since it lacks the ability to save data to a memory card.
At ElectroPeak, you can get the ATmega328P microcontroller—the same heart behind the Arduino Uno—for a fraction of the cost. It runs at 8MHz out of the box, but with a 16MHz crystal and two 22pF ceramic capacitors, it easily scales up to 16MHz. Even if you don’t have a dedicated programmer, you can still flash the bootloader using just a breadboard, some jumper wires, and another Arduino board. A solid, budget-friendly choice for hobbyists.
ElectroPeak’s product is ideal for USB integration, offering reliable data transfer alongside a stable 5V power supply. It works perfectly on the board and delivers exactly what is needed.
ElectroPeak delivers excellent value here. The build quality is solid, and I really appreciate the cutouts in the packaging—it makes accessing the GPIO pins and other ports much more convenient.
A fantastic tool for diagnosing components like transistors and resistors. It not only provides accurate readings but also pulls up the relevant datasheets, which is incredibly helpful when dealing with burnt-out parts. I’m thoroughly satisfied with the performance and have even built a custom enclosure for it. Kudos to the ElectroPeak team for this well-designed product.
Using this tester is a breeze; the intuitive design means you rarely need the manual. Big thanks to the team at ElectroPeak for running such a helpful platform. It would be even better if you could launch a dedicated ElectroPeak App in the future.
I recently reached out to ElectroPeak to ask about product availability. Their support team was incredibly responsive; they immediately clarified that they would notify me with an estimated arrival date as soon as the item was secured. I was really impressed by how clear and direct their communication was. A solid 5 stars for keeping their promises!
I haven’t had a chance to use the tags just yet, but ElectroPeak’s design hit the mark for what I needed. Overall, I’m happy with the choice. Thanks!
I bought this I2C backpack for my LCD module from ElectroPeak and it’s been a fantastic addition to my electronics projects. Although I’m using a 20x4 display, the default 0x3f address worked perfectly right out of the box. The library integration with setCursor is seamless, allowing me to easily extend the text flow onto the fourth line without any hiccups. Great quality from the ElectroPeak team!
After getting hands-on with the ElectroPeak board, I found it to be a solid 4-star choice. It really captures the essence of an Arduino Uno in a compact form, making it perfect for IoT projects. The convenience of using a standard micro USB cable for both power and data is a nice touch, and considering the feature set, the price point is quite competitive. The built-in Wi-Fi module is a great bonus. However, there is a learning curve: you’ll need to install specific drivers and libraries to get it working with the Arduino IDE, which adds a bit of setup time compared to plug-and-play boards. Documentation could also be improved, particularly regarding how to configure special shields like the motor controller and setting up the Wi-Fi module. If you are willing to put in the effort to learn the setup process, it’s a capable and affordable platform.
ElectroPeak’s selection of optocouplers is great for isolating circuit points using light. These components feature an LED on one side and a receiving sensor on the other, letting you switch another circuit by applying voltage without a physical connection. Their overall behavior is quite similar to transistors or a light relay.
ElectroPeak delivered a servo that feels solid and well-made, which justifies the quality rating. However, be aware of the power requirements: it draws significant current, so connecting it directly to an Arduino pin risks burning it out. You’ll need either a 5V battery or an L298 driver module to use it safely with your board. Also, avoid supplying more than 5V, or you might damage the servo. The positioning isn't perfectly precise—it doesn't always stop exactly at zero degrees—which is typical for Chinese-made components. But if you don’t need extreme accuracy, this unit will handle the job just fine.
Shoutout to the team at ElectroPeak for this handy module. I was previously struggling with connecting an LCD to my Arduino, which ate up a lot of pins and took forever. This I2C adapter made the connection super fast and freed up my GPIOs. However, I hit a snag on the first use: the backlight worked, but the screen was blank. A bit of digging revealed that the I2C address might not be 0x27 or 0x3f, which caused the issue. To fix it, I used the "Wire Scanner" example from the library to find the correct address via the serial monitor. If you’re running into the same silence, just check your address! Solid product, just keep an eye on the config.
ElectroPeak’s frame is sturdy and doesn’t feel flimsy at all. I haven’t put it through its paces yet, but the build quality looks solid. The full 180-degree range is nice. One small tip: it would be super helpful if product images included a common object like a coin or pen for scale, so we could better gauge the actual size.
ElectroPeak offers a reliable module that delivers straightforward performance without breaking the bank. It’s a solid choice for various projects, making it a practical add to any build.
ElectroPeak’s joystick module is a budget-friendly option that gets the job done for basic setups. However, the response curve is quite inconsistent, making it a poor choice if you need accuracy for fine motor control tasks.
Rating: 4/5 I have a running joke with ElectroPeak: the moment I decide to make a purchase, their inventory mysteriously vanishes. I’m starting to wonder if customs delays are to blame for this timing quirk. Fortunately, customer support clarified that the shipment has actually arrived; they are just currently in the process of uploading the new stock to their website.
I recently purchased a tester from ElectroPeak and found it to be a solid choice. I would rate it four stars because, while the device itself works well, the experience improves significantly if you have the component datasheet on hand. Cross-referencing the tester’s output with the datasheet is the best way to verify that your parts aren't damaged.
ElectroPeak delivers an excellent replacement module that breathes new life into dead computer speaker amps or mp3 players. It’s a reliable fix for those burnt-out units, and the performance is spot on. Highly recommended!
ElectroPeak delivered an exceptional product. These modules are incredibly precise, making them perfect for high-accuracy tracking in applications like paper cutting machines. A solid 5/5 choice for anyone needing reliable coordinate positioning.
5.0 out of 5.0 I was a bit confused by the specs on ElectroPeak listing a brushless motor while the description mentioned just applying voltage to the red and white wires for control. Does that mean it operates without a separate driver? The response was polite, directing me to their forum for deeper technical questions.
I asked ElectroPeak if they include antennas with their products, and the answer was a confident yes. The accessories matched exactly what was shown in the photos. Reliable service from the team at electropeak.com.
ElectroPeak was incredibly responsive. I asked for the product guide and catalog, and they promptly confirmed they would review and send it over. Great service from the team!
I checked the performance of ElectroPeak products and was curious if faster SD cards, like one hitting 48 MB/s, actually make a noticeable difference in OS boot times. The verdict is that, surprisingly, upgrading to a higher-speed card doesn't significantly improve boot speed. While it’s a useful detail to know, the impact is minimal, so I’m rating this insight as average.
ElectroPeak support was quick to clarify that the board doesn't have the red and blue side lines I asked about. Clear, direct answer. 4/5
ElectroPeak’s module is a reliable power transmitter that handles both boosting and bucking seamlessly. It adjusts the output voltage regardless of the input range (3-32V), ensuring you get exactly what you set, whether stepping up or down. Great product!
ElectroPeak really knows how to deliver! I was worried about compatibility, but they actually included the special cable with the camera. It was a nice surprise to find everything I needed right in the box. Highly recommend shopping here.
I’m just checking if the probes from ElectroPeak come as a set or individually. The answer I got was that they are provided as a pair.
ElectroPeak really delivers on their promises. I was curious about the cable situation, and they confirmed it comes with the necessary cord right out of the box. Smooth transaction and great support!
I am thrilled with my purchase from ElectroPeak. The image quality is fantastic, though keep in mind this model doesn't feature night vision. It functions just like a standard 5-megapixel sensor, but the hardware is significantly better than older iterations because it is built by Waveshare themselves. I highly recommend version 2.1 over the older 1.3 models. I previously bought a 1.3 unit from a different vendor for cheap, but it was completely defective and showed no image. Returning it was a major hassle. In contrast, the camera from ElectroPeak works perfectly and is well worth the money. Thanks for the great product!
I love ElectroPeak for their quick and helpful support! I was wondering about the 8GB model and the difference between the old purple boxes and the current red ones. It’s great to know that the high-capacity version is coming next week, and they even clarified that the product photos just need updating. Five stars for such clear communication!
I was surprised by the pricing for this micro bootloader on ElectroPeak, especially since the site usually offers better rates. Is there an Arduino chip inside? The cost is noticeably higher than at other retailers. The support team clarified that there is no Arduino module in the unit and that the price was just adjusted. It’s a decent component, but the current pricing feels a bit steep compared to the usual value.
Four out of five stars. ElectroPeak had the item out of stock initially, but their customer service was prompt and reassuring. They explained that a clearance process was underway and promised restocking by next week. Good communication and clear updates from the team.
I’m eager to see when ElectroPeak will restock this item, as I have an urgent need for it. The support team mentioned they’ve already placed an order and expect availability in roughly three weeks. Waiting is a bit of a drag, so I’m giving a neutral rating.
News
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
Widgets
Get the widget for your site →About ElectroPeak
ElectroPeak is an online store that sells electronics and robotics components for hobbyist and prototyping projects. Its product catalog includes development boards such as Arduino and Raspberry Pi, microcontrollers, sensors, displays, wireless and IoT communication modules, power and battery products, motors and actuators, 3D printer parts, and assorted electronic components, tools, cables, and connectors. The site offers standard online retail features such as user accounts, order tracking, multiple currency options, and free shipping on orders over $100. It also provides a section called Roboclub for educational content related to learning electronics and robotics.
- Website
- electropeak.com
- Phone
- +8618126402859
- info@electropeak.com