My first order from Earphone DIY Labs arrived without any issues. I’ve built headphones using around 20 different drivers, and this one stands out as a top performer. Highly recommended.
What reviewers say about Earphone DIY Labs
What is Earphone DIY Labs?
Earphone DIY Labs is a business listed on Trustburn.
What is the official website of Earphone DIY Labs?
The official website of Earphone DIY Labs is earphonediylabs.com.
How is Earphone DIY Labs rated on Trustburn?
On Trustburn, Earphone DIY Labs has a rating of 4.9 out of 5 based on 92 reviews.
AI-generated from reviews on this page. Verify anything important with the company directly.
Earphone DIY Labs delivered my first order right on time, and the experience was top-notch. As someone who has experimented with around 20 different drivers in their own builds, I can confidently say this is one of the best I’ve used. If you are looking for high-quality components, I highly recommend checking them out.
These headphones are absolutely delightful! I’m thoroughly impressed with the quality and my overall satisfaction. Kudos to Earphone DIY Labs for such a great product. Highly recommended!
Genuine craftsmanship shines through with these headphones from Earphone DIY Labs. A solid 5-star experience that lives up to the hype. Highly recommended for anyone looking for quality audio gear. Thank you for the excellent product!
I replaced my SR80x with these and I am really happy with the choice. Delivery took around 12 days, which is a bit slow, but for the price from Earphone DIY Labs, it is absolutely worth the wait.
I recently got the Earphone DIY Labs as a replacement for my SR80x and I'm really happy with the choice. The value for money is excellent. Shipping took about 12 days, which is a bit slower than I'd like, but given the quality at this price point, it's totally acceptable. Highly recommended!
I decided to invest in high-end drivers from Earphone DIY Labs that cost more than some complete headphones I own, and it was definitely worth it. I bought the units with GS3000e covers and customized them into GS3000E style shells by drilling additional holes in the back to fine-tune the acoustics. Even though I haven’t heard the original Grado GS3000E headphones, these drivers sound superior to anything else in my collection. I installed them into a Grado-style metal upgrade kit I picked up on eBay, and the result is outstanding. The frequency response is incredible, and the low impedance combined with 99.8dB sensitivity means they are easy to drive without needing an amp, though an amp does help pull out the best performance. I’m picking up nuances in my music I never noticed before. The sound is naturally warm, highly resolving, and retains that signature Grado character while offering exceptional detail. The soundstage is wide and imaging is precise. They handle every genre beautifully, from EDM and hip-hop to rock, pop, metal, jazz, and classical.
Picked up the GS3000e drivers from Earphone DIY Labs and they completely blew me away—worth every penny, even if they cost more than some full headphones I own. I bought the versions with the covers and customized them into a GS3000E-style shell by drilling holes in the back of the driver; I started with just one and added a second until I nailed the perfect sound signature. Even though I haven’t heard the original Grado headphones, these sound better than anything else in my collection. I mounted them in a Grado-style metal upgrade kit I found on eBay. The frequency response is stunning, and the low impedance paired with that 99.8db sensitivity makes them easy to drive. You don’t strictly need an amp, but using one definitely helps you get the most out of them. I’m picking up details in my music that I never noticed before. They offer a naturally warm tone with excellent detail and high resolution, while still keeping that classic Grado character. The soundstage is wide, and the imaging is spot-on. They handle everything from EDM and hip-hop to rock, pop, metal, vocals, jazz, and classical beautifully.
I took some worn-out Yamaha monitors off the wall and gave them a new lease on life by installing B&O-H7 drivers from Earphone DIY Labs. The transformation is incredible; the clarity is back, and the sound is vivid and powerful. These modified speakers are now my go-to for enjoying high-quality music, easily surpassing their old performance.
I took a pair of Yamaha monitors that had been gathering dust on the wall for years due to their lost clarity and rebuilt them with the H7 drivers from Earphone DIY Labs. The transformation is incredible. My old reference no longer compares because it has been reborn into a vivid and powerful audio tool that truly lets you enjoy high-quality music.
I’m rounding this up to a full five stars. From Earphone DIY Labs, these IEMs deliver exceptional value, particularly if you’re looking for that high-end V-shaped signature without the premium price tag. The highlights are undeniable: the bass has incredible resolution and extension, and the treble is crisp and clear. They perform beautifully with high-res streaming on Tidal and even when paired with a Chord Mojo DAC. The passive noise isolation is also top-notch, making them perfect for travel or blocking out cafe noise. Shipping was quick, arriving in about a week with a magnetic pouch and a wide variety of ear tips, which is a nice touch. However, there are trade-offs. The midrange is slightly recessed, causing vocals to get masked by the heavy bass on intense tracks. This is noticeable during Zoom calls or when watching movies, where voices can sound a bit distant. It’s not a dealbreaker for me—I’ve gotten used to it—but it’s something to keep in mind. They are also quite tip-dependent; it took me a while to find the right seal, though the box was generous with options. One major downside is the lack of support. I’ve sent follow-up emails and checked their Facebook page with zero responses, so don’t expect help if something goes wrong. Overall, despite the quiet customer service and midrange quirks, the technical performance and price point make these a fantastic recommendation for anyone wanting flagship-level sound for a fraction of the cost.
Picked up the micro Tesla driver version without a cable and was pleasantly surprised when the team from Earphone DIY Labs kindly included one. Thanks for that thoughtful touch! Since I don’t own the original IE800s, I can’t make a direct comparison to them, but as someone with a collection of over ten IEMs—ranging from budget Sony MH750s to the beloved Sennheiser IE300, OG Arias, and the detailed Diokos—I have plenty of experience. The IE300 was my gold standard until I heard these. I’m more of an enthusiast than a critic, so please take my impressions with a pinch of salt. The bass is the star here: it thumps with authority. As a bassist, I appreciate low-end that isn’t muddy, and these deliver tight, clear, textured bass that doesn’t bleed into the mids. It just fits perfectly. Tracks like David Guetta’s "Movement Girl" revealed subtle bassline wobbles I’d never noticed before, proving the resolution is outstanding. The mids have a mild V-shape but support the presentation beautifully, especially with lush synths like in Donna Lewis’ "I Love You Always Forever." The highs are brilliant and expansive without being harsh or sibilant, only reflecting what’s already in the recording, like on Marvin Gaye’s "Heard It Through the Grapevine." The soundstage is impressively wide for an IEM, extending well beyond the ears. Imaging is razor-sharp; every instrument has a defined place with zero ambiguity. What really sets these apart, alongside the planar-magnetic Dioko, is the level of detail. But beyond raw specs, there’s a cohesion I haven’t found in my other gear. Many IEMs excel at one thing while failing at others, but like the IE300, these handle everything incredibly well—not necessarily perfectly, but to a level that creates a deeply immersive experience. Add in the price, and it’s an absolute bargain. I absolutely love them!
Purchased the micro Tesla driver in the bare version and was pleasantly surprised to receive a cable included, so thanks for the thoughtful touch. Since I don’t own the original IE800s, I can’t make a direct comparison, but I do own over ten IEMs, ranging from the affordable Sony MH750 to the Sennheiser IE300, as well as the OG Aria and Dioko models. I was quite fond of the IE300 until I tried these; they have genuinely raised the bar for me. As someone who simply enjoys high-quality audio rather than critiquing it, I’ll offer my honest impressions. The bass is impressive—tight, clear, and textured without bleeding into the mids. It doesn’t overstay its welcome, yet the detail is startling. When listening to "Movement Girl" by David Guetta, I could clearly distinguish a gurgle in the bassline that I had never noticed before, confirming it wasn't distortion but genuine detail. The mids are well-balanced within the V-shape signature. They handle lush synth tracks like "I Love You Always Forever" by Donna Lewis with full presence, neither dominating nor being overshadowed by other frequencies. The highs are brilliant and extended without being harsh or sibilant, accurately reproducing vocal textures without adding artificial sharpness. The soundstage is notably wide, extending well beyond the ears, which is impressive for this form factor. Instrument imaging is precise, with every sound placed distinctly in space. The level of detail surpasses even my planar magnetic Dioko, which usually excels in this area. What stands out most is the cohesion. Unlike many IEMs that excel in one area while neglecting others, these deliver a unified experience where everything works together seamlessly. Like the IE300, they do everything very well, creating an immersive sound. Considering the quality delivered by Earphone DIY Labs, the value is exceptional. I love these IEMs!
I’m absolutely thrilled with my GS3000E pre-assembled headphones from Earphone DIY Labs. After 80 to 90 hours of use, the sound has only kept improving, delivering a performance that is truly exceptional. While I haven’t had the chance to A/B test them against the original Grado GS3000E, I suspect they are at least on par, especially considering my SR80E’s are nowhere in the same league. In fact, these from Earphone DIY Labs sound superior to both my Sennheiser HD6xx and Audeze LCD-2 Classics. Running them through a Schiit Bifrost DAC with the Unison upgrade and a Lyr amp with 6H23n-EB tubes, they have undoubtedly become my new daily drivers. The build quality is solid, and while the stock cable is a bit short, a simple extension cable solved that issue. They handle every music genre beautifully and are a joy to listen to. If you check out the Grado website for expectations, you’ll see exactly what kind of sound you’re getting here. Highly recommended!
Picked up the pre-assembled GS3000E from Earphone DIY Labs and they have completely won me over. After nearly 90 hours of listening, the sound keeps improving with every session. I haven’t had the chance to compare them directly to the original Grado GS3000E, but if they beat these, it would be amazing. My SR80E and Sennheiser HD6xx models are good, but these don’t even come close. Even my Audeze LCD-2 Classics sound inferior to the build from earphonediylabs. Paired with a Schiit Bifrost DAC and a Lyr amp using 6H23n-eb tubes, they are easily my new everyday headphones. The construction is solid, though the cable is a bit short—I just added an extension and that solved it. They handle every genre of music beautifully. If you read the reviews on the Grado site, you’ll know the quality you’re getting here.
Got these from Earphone DIY Labs with the 10mm Tesla driver and the soundstage opened up right away. They handle movies, games, and music really well. Once you dial in a good EQ, they are truly impressive.
Earphone DIY Labs really knows their stuff. I was surprised to find that these pads do more than just slightly expand the soundstage compared to the G series; the subtle shift in driver distance actually transforms the experience. The fit is night and day—whereas the G pads feel like they just rest on your ears, these create a true circumaural seal that feels much more comfortable. If you are modding Grado cans, swapping in these pads along with one of their leather headbands completely revitalizes the headphones. My GS3000s sound and feel like a totally different pair of cans. A must-try for anyone looking to upgrade.
I recently completed my build using the GS3000e kit from Earphone DIY Labs and have been listening to them daily since. I opted for the three-layer pads, the mid-tier solid leather headband, the GS3000e drivers, and a custom MMCX cable from Hart Audio. I’m really impressed with the final aesthetic and would love to share some photos of my build with EDL for their site. The sound signature was actually quite different from my expectations. Instead of the "sparkly" treble I anticipated, the mid-low bass is warm, rounded, and very detailed with excellent imaging. They are incredibly easy on the ears, allowing for long listening sessions without fatigue. While they differ from the cheaper e-series Grados, they still capture that characteristic Grado energy. The combination of the headband and pads is so comfortable I could wear them for hours. If I were to do it again, I might spend a bit more on the cocobolo cups for the aesthetic upgrade. The mahogany I chose looks and feels great, with crisp logo engraving, though I did notice the inner cylinder is just stained to match rather than being solid mahogany. That said, unless you are on a tight budget, the cocobolo is worth it. I’m docking one star because the cup kit I received was incorrect. I got a higher-tier kit that lacked MMCX connectors and included a Grado cable instead, with no pre-drilled holes. Fortunately, I had spare MMCX connectors, so I drilled the holes and installed them myself without issue. It’s a minor hiccup, though I’ll put the included Grado cable to good use elsewhere. Regarding the hardware, the original gimbals are a bit restrictive with detachable cables. I removed them, cut about an inch off the bottom with a hacksaw, and smoothed it down with a file and sandpaper. This modification significantly improves the pivot and looks cleaner. I’d highly recommend the silver gimbals over the black ones: the black screws are tapped into the wood with CA glue, making removal messy, whereas the silver ones use Allen head screws and nylock nuts for easy reinstallation. I actually added the silver gimbals to my order for the headband. The build process itself is straightforward. I secured the drivers using a very thin ring of hot glue around the inner lip. It’s tight, so you need to be sparing with the adhesive. While a slower-drying adhesive like rubber cement might be easier for assembly, I prefer hot glue because it allows for easy driver removal in the future by simply heating the cup. Overall, this was a fun, five-star project. For the price of a pair of headphones that would cost around $1,800, getting this level of quality for a fraction of the cost is fantastic. I also think the AKG 701-style drivers from EDL would sound amazing in this chassis, offering incredible detail and sub-bass. Just remember to glue the included covers on top once the drivers are installed.
Just wrapped up my GS3000e build from Earphone DIY Labs a couple of weeks ago, and they’ve quickly become my daily drivers. I went with their "3 layer" pads, the mid-tier solid leather headband, the GS3000e drivers, and a custom MMCX cable from Hart Audio. The result is absolutely stunning, and I’d love to share photos of the final build with EDL for their site. The sound signature caught me off guard in the best way. I expected something sparkly, but instead, I got a warm, well-rounded mid-low bass that is incredibly easy on the ears. There’s plenty of detail and imaging without any fatigue. They retain that classic Grado energy but feel like a step up from the cheaper E-series models. Thanks to the headband and pads combo, I can wear them for hours without any discomfort. If I were to do it again, I might splurge on the cocobolo cups. The mahogany looks and feels great, and the logo engraving is crisp, though I learned the inner cylinder is just stained to match, not real mahogany. That said, unless you’re on a tight budget, the cocobolo is worth it for the aesthetics. I’m knocking off one star because they sent me the wrong cup kit. I received a pricier option that lacked MMCX connectors and included a Grado cable instead, with no pre-drilled holes. It wasn’t a huge deal—I had spare MMCX connectors, drilled the holes myself, and mounted them just fine. I’ll probably repurpose the Grado cable somewhere else. I also noticed the OEM gimbals don’t swivel enough for detachable cables. I ended up cutting about an inch off the bottom middle with a hacksaw and sanding it down. It looks cleaner now and offers much better pivot, which is great if you go for the thicker stacked cushions (highly recommended). Pro tip on the gimbals: go with the silver ones. The black ones require repainting after cutting, and their screws are tapped into the wood with CA glue, making removal a bit of a mess. The silver ones have allen slots and nylock nuts, so reinstallation is a breeze. I actually added the silver gimbals to my headband order to avoid this issue. Assembly was straightforward. I used hot glue for the drivers—just a tiny, thin ring on the inner lip since the fit is tight. It’s secure but allows for easy removal later by heating the cup, though slower-drying adhesive might be easier for beginners. Overall, this is a fantastic project. It’s fun, manageable, and lets you build a pair of headphones that retails for nearly $1,800 for a fraction of the price. I’d also recommend pairing these with EDL’s AKG 701-style drivers for even more detail and sub-bass.
I am absolutely thrilled with my purchase from Earphone DIY Labs. The quality is fantastic! My only small wish is that they offered the drivers as a standalone option, without the attached aluminum piece.
Earphone DIY Labs is simply fantastic! I’m giving them a perfect 5 stars, though it would be great if I could purchase just the drivers without the aluminum housing.
I swapped these drivers into my Openheart 50mm metal Grado-style cans and they fit perfectly without any mods. After soldering the leads and using the big Grado G pads, the result was impressive. They really excel at detail, creating an immersive soundstage where instruments feel like they are moving all around you. The separation is excellent, and while they aren’t overly bassy or treble-heavy, their midrange is outstanding and their bass extension is surprisingly capable when the music demands it. These headphones have a dry, analytical character, which is a refreshing change from my other more colored gear. They make music engaging simply by revealing details I hadn’t noticed before. However, be careful with your ear pads—the Grado S and L pads, along with closed sheepskin or vented leather options, don’t work well. These drivers need space to breathe, so they perform poorly in closed housings, where the bass turns muddy and weird. I’d recommend sticking with spacious open-back designs like the AD700 or the Openheart 50mm metal cans I used. A big thank you to the team at Earphone DIY Labs for helping me confirm the compatibility. They easily turned a budget pair of headphones into a high-end listening experience.
These fit perfectly on my SR80x and vintage SR225 models. While they may be a budget choice, they replicate the original design effectively, featuring a comfortable headband with thick, soft faux leather and adequate padding. Although the newer Grado X line offers slightly thicker padding, these are a distinct improvement over the older E series and are especially useful if your original headband has become loose. There was one minor stitching irregularity, but it didn't impact performance or comfort. Given that these come from Earphone DIY Labs, I consider the small defect to be a natural part of their handmade quality.
Huge thanks to Earphone DIY Labs for helping me verify that these drivers would fit my specific project! I swapped them into a pair of 50mm metal housings that mimic the Grado style, and the fit was perfect right out of the box. Installation was straightforward: I just tapped the old drivers out from the back without needing heat, peeled off the felt, and unscrewed the covers to pop these in. They even have a red dot marking for positive polarity, which makes wiring a breeze. The sound is nothing short of stunning. With large Grado G-style pads, they reveal incredible detail, making tracks like Queen’s "Bohemian Rhapsody" feel incredibly dynamic and three-dimensional. The instrument separation is fantastic, and while they aren’t overly bright or bass-heavy, their midrange is absolutely brilliant. They offer a dry, analytical presentation that feels like a refreshing change from more colored headphones I usually listen to. A quick tip for anyone trying this mod: the housing choice is critical. These drivers need space to shine, so they struggle in closed cans or with certain pads like Grado S/L or vented leather, which can lead to distorted, boomy bass. They also perform poorly in closed enclosures. However, they thrive in spacious open designs like the AD700 or the Openheart knockoffs I used. For just the price of the drivers, you can easily upgrade a budget pair of cans to sound like a $500 audiophile reference. Highly recommend!
Great choice from Earphone DIY Labs. These work flawlessly with my Shanling M3X and UP5. I even notice that the volume level needed is lower compared to the stock cable. Highly recommended.
Earphone DIY Labs really set the bar high for customer service. The team is incredibly supportive and genuinely cares about your satisfaction. When my SE846s suddenly died for no apparent reason, I emailed them and they just sent a replacement—problem solved with zero hassle. As someone who collects headphones, I can say their gear matches the hype, if not exceeds it. You won’t find better sound quality for the price anywhere else. I’ll admit, I was a bit nervous ordering from an unknown seller at first, feeling like I was taking a risk. But that gamble paid off. The staff is helpful, knowledgeable, and honest, and every claim they make seems to be true. Highly recommend.
Shipped back in early 2022 and finally arrived! It’s great to see that Earphone DIY Labs is still around and offering these awesome earphones. The sound quality is simply fantastic.
I placed my order back in early 2022, and it finally arrived. It is great to see that Earphone DIY Labs is still offering these incredible earphones. The audio quality is absolutely fantastic!
I’ve got quite a few headphones, but these are easily the best sounding ones I’ve owned. The tuning is spot on and the soundstage is genuinely impressive—it’s become my daily go-to. You can tell the team at Earphone DIY Labs really knows their craft. There were a couple of tiny dings on one of the cups, which is a slight letdown, but for that kind of audio quality, it’s absolutely forgivable. Thanks!
If you are looking for that classic Grado character without breaking the bank, Earphone DIY Labs is the place to go. I built these headphones using their chambers, GS3000e drivers, and a Grado headband, and the audio quality is phenomenal for the ~$00 price point. Having owned M1s and various RS and PS models in the past, I feel this custom setup captures the true Grado sound better than anything else I’ve tried. Sure, there are minor cosmetic quirks: the chambers have some slight scratches, the engravings aren’t perfectly uniform like a genuine Grado, and the left/right units were installed backward (though I easily fixed that by swapping the brackets). But honestly, the sound quality more than makes up for these tiny imperfections. I also want to highlight their excellent customer service. I requested the connector be upgraded to a 4.4mm TRRRS, and they waived the extra fee, which was a nice surprise. I’m extremely happy with the result and am already planning my next purchase: I’ll be ordering PS-1000e drivers and MS-Pro chambers for my M1. Highly recommended!
If you love tinkering with electronics, Earphone DIY Labs offers an excellent kit that is well worth your time. As a DIY enthusiast, I can confidently say this is a top-tier product for anyone looking to build their own gear. Five stars!
If you are a DIY enthusiast, Earphone DIY Labs offers an excellent kit that comes highly recommended.
Earphone DIY Labs sets the bar high for both product quality and customer care. I recently encountered a minor defect with my EDL Grado PS1000e, and their support team handled it seamlessly. Since I couldn’t reproduce the issue on camera, they simply shipped me a replacement free of charge. It turned out to be perfect. This kind of hassle-free policy effectively removes the risk of buying high-end gear. Beyond the stellar service, the audio performance is exceptional. The sound quality is phenomenal, easily surpassing my Sennheiser HD 650. For a lower price, you get a truly next-level audiophile experience. Highly recommended.
My recent purchase of Grado GS 3000 drivers from earphonediylabs.com was a great experience. The items arrived promptly and were packaged with care. I was thoroughly impressed by the audio performance, noting a rich, warm tone and surprisingly strong bass response. Based on this positive experience, I plan to order a complete kit in the future.
Shoutout to Stephen for sharing his positive experience with his new build. We’re happy to confirm that the frequency response differences between the GS3000e and SR125s are real, yet both retain that classic Grado signature we’re known for; we’ll be posting the detailed charts on Earphone DIY Labs soon for fellow DIYers. Regarding the MMCX connector issue you flagged, it’s likely due to the cable length, and we’re already working on a fix to get it sorted out quickly.
Huge thanks to Stephen for the update on the build. We’re planning to share the frequency response data soon to help DIYers clearly see the differences between the GS3000e and SR125s models. Rest assured, they both stay true to that classic Grado signature sound. We also appreciate you flagging the MMCX connector issue; it’s likely due to the cable length being a bit short, and we’ll get that sorted out as quickly as possible.
My experience with Earphone DIY Labs has been largely positive. I managed to solder, dry-fit, and assemble the unit in under half an hour, which was surprisingly fast. I plan to glue everything down once I’m sure the sound is up to par. Even though I’m not an audio professional, the sound quality is stunning to my ears—honestly better than my old Grado SR125s. I went with the G pads and the artificial leather headband, which fit the bill well. I’m giving it four stars instead of five because of a manufacturing quirk on one of the cups. The MMCX connector was mounted too close to the wood, preventing the cable from seating correctly. It took some gentle sanding and an Exacto knife to fix it, but it’s working now. A mere extra millimeter of clearance during production would have saved that hassle.
I’m really enjoying my project with Earphone DIY Labs. Assembly was a breeze—I had everything soldered and dry-fitted in under half an hour. I’m waiting to test the sound before I glue the components in place. While I’m not an audio engineer, the audio quality is fantastic. Honestly, they beat my old Grado SR125s hands down, even if I can’t technically explain why. I went with the G pads and the artificial leather headband for a comfortable fit. I’m giving four stars because I had to modify the MMCX jack on one side; it was positioned too close to the wooden housing, preventing a proper connection. A bit of sanding and an Exacto knife fixed it, but adding just a millimeter of clearance from the factory would have been ideal.
Apologies for the delayed response! The team has been heads-down building and shipping for months and is a bit swamped. We’re working on getting more support to handle emails faster, so please stick with us for a few weeks. Big thanks for your patience!
JM, thank you for the excellent work! The PS1000e driver is genuine, and the acoustic structure matches the original perfectly. That’s exactly why Earphone DIY Labs was able to deliver the expected sound reproduction in this build.
Five stars, but a heads-up on communication! The team is swamped building and shipping orders right now, so email replies have been slower than usual. They are working on hiring more people to get responses back to normal in a few weeks. Apologies for the wait!
JM, thanks for the smooth process. It’s great to see Earphone DIY Labs in action with such precision. Using the genuine PS1000e driver and replicating the exact acoustic structure really delivers on the promise—the sound signature matches perfectly. Solid build quality and accurate reproduction from your site.
My experience with Earphone DIY Labs has been truly impressive. The build quality is top-notch, and when you pair the kit with PS1000e drivers, you get that signature, pure Grado sound. As someone who owns original Grados, I can confidently say these match up side-by-side in terms of audio performance. The construction process was straightforward, making it easy to assemble. I stumbled upon their website and I’m really glad I did. The audio output is incredibly detailed with an expansive open soundstage that is unmistakably Grado. My only minor gripe is that responses to emails or messages can be a bit slow, but rest assured, the team is legitimate and delivers exactly what is promised.
Huge fan of the build quality here. Pairing the PS1000E drivers with this kit delivers that signature authentic Grado tone that I’ve come to love. As a longtime owner of original Grados, I’m genuinely impressed to find these sitting side-by-side on sound alone. It’s a smooth, detailed open-back experience. Construction is straightforward and the final product matches the description perfectly. My only gripe is the communication—emails tend to go unanswered—but you can trust that Earphone DIY Labs delivers on their promises. Highly recommended for audiophiles chasing that specific sound.
After months of daily use with the 8mm Tesla XWB drivers, I’m still thrilled with my Earphone DIY Labs purchase. Getting the fit right took a bit of tinkering: I started by using a heat gun on the mmcx connectors to straighten the cable, which solved the issue with the ear hooks slipping out. Since the IE800-style housing has a shorter nozzle than standard IEMs, I initially struggled with poor seals and bass response. Switching to Bose StayHear tips provided the secure fit I needed, though the tight seal created air pressure buildup. I fixed that by poking a tiny hole in the silicone flange to vent the pressure, a trick I found on Head-Fi. Now, I have a perfect, comfortable fit that delivers powerful bass and allows me to enjoy superior sound quality every day.
I’ve been using these 8mm Tesla XWB earphones from Earphone DIY Labs for a few months now and they are still a delight to listen to. I went through a bit of a tweaking process to get the perfect fit. At first, I wasn’t a fan of the over-ear cable design since it wouldn’t stay put in my ears, so I heated the cable near the MMCX connectors to straighten it out for a more traditional in-ear look. Because the IE800 housing nozzles are shorter than average, they didn’t seal initially, which killed the bass. I followed some advice from the head-fi community about Bose “StayHear” tips, which provided a much more secure fit. However, that tight seal created air pressure buildup in my ear. To fix that, I cut a tiny vent into the silicone flange to equalize the pressure. After these modifications, they are comfortable enough for daily use and the sound quality remains impressive.
Shipped to Canada in just 8 days, and I’m thrilled with my purchase from Earphone DIY Labs. The packaging was thorough—wrapped in a FedEx bag, cardboard box, and a small envelope that safely held the Sennheiser-style faux-leather pouch, the headphones, two cable sets, and spare silicone and foam tips. My first impression was that they feel solid and high-quality, not like cheap plastic. The sound is excellent, especially after using Sony MDR-EX110s, which sound muddy in the bass and anemic in the highs by comparison. The 8mm Tesla drivers deliver clear highs and tight, impactful bass—making these a standout at this price point. A couple of notes on the ordering process: I registered for an account but never received the confirmation email, even after requesting it multiple times. I then ordered via PayPal. After one day, I got an email saying the order was completed, but no shipping or tracking info. They arrived today, 6 days later, so I’m happy with the result. If I were really nervous and impatient, I might have bombarded the team with messages, but the product is worth it. Trust the process!
Shipped to Canada in just eight days, and I’m thoroughly impressed with my Earphone DIY Labs order. The packaging was thoughtfully layered—a FedEx bag, a sturdy cardboard box, and an envelope holding everything neatly. Inside, the Sennheiser-style faux leather case, the headphones, two cable sets, and extra silicone or foam tips were all secured in small zip-lock bags. Right out of the box, they feel solid and premium, with zero cheap plastic feel. The audio quality is a massive upgrade from my old Sony MDR-EX110s. With the 8mm Tesla drivers, the highs are crisp and the bass is tight and punchy, whereas the Sonys sounded muddy and thin in comparison. Obviously, for an $20 pair of earbuds, this is exceptional value. The buying process had a slight hiccup: I signed up for an account but never received the email confirmation, even after a few requests. I ended up ordering via PayPal instead. I got an order confirmation email the next day, though no tracking info was included initially. However, the headphones arrived six days later, so it all worked out. While I might have messaged them a few times if I were anxious, I can trust the process. The products are definitely worth the wait!
I’ll admit, I approached Earphone DIY Labs with a bit of skepticism, but it turned out to be the smartest $60 I’ve ever put into high-fidelity audio. I had a pair of Audio-Technica ATH-AD700s gathering dust because they just never sounded right to me, so I grabbed my soldering iron and multimeter to swap the drivers. Even though the replacements were slightly larger than 50mm, I managed to make them fit with some custom cardboard shims and epoxy. The process was a bit of a hassle, especially since the new diaphragm lacked a metal cover, but the result was worth it. After testing them for a few weeks, I’m genuinely thrilled. They’ve actually replaced my Shure SE535s as my daily drivers—the sound quality is fantastic.
I’ll admit, I was a bit doubtful at first, but I decided to give Earphone DIY Labs a shot, and it turned out to be one of the best investments I’ve made for my hi-fi setup, costing around $60 including shipping. I had previously bought Audio Technica ATH AD700s based on their Amazon ratings, but I never liked the sound and let them gather dust. Since I have a soldering iron and multimeter, I figured I could just swap the drivers myself. The original drivers were over 50mm, so fitting the new ones required some creativity—I ended up making cardboard shims and epoxying them to the edges, plus dealing with the lack of a metal cover on the new diaphragm. It was a bit of a struggle, but once I finished, I was thrilled with the result. After using them for a few weeks, the sound quality is excellent. Even though I own Shure SE535s, these custom-modded Audio Technicas are now my daily drivers.
The quality looks great, I'm just not a fan of the current color. I'm thinking of spray painting the shell black—do you know if that would leave a sticky finish?
Bought these right before the holidays from Earphone DIY Labs and was pleasantly surprised by the shipping speed. The installation was a breeze; I softened the silicone cups in hot water and snapped them onto my SR80e headphones in about ten minutes. They fit perfectly without any adhesive, so I’m confident they won’t shift around during use. The new cups definitely give the earphones a fresh look, and while part of the sound improvement might be in my head, the build quality feels solid. Highly recommend for anyone looking to refresh their audio setup.
Just got my DIY set from Earphone DIY Labs right before the holidays, and the shipping speed was impressive. The upgrade process for my SR80e headphones was surprisingly easy—I just softened the cups in hot water and snapped them into place in under ten minutes. They fit snugly without any glue, so I have zero worries about them shifting. The new look is sharp, and while the audio improvement might be partly in my head, the build quality feels solid. Definitely a worthy purchase if you want to customize your headphones.
Earphone DIY Labs offers products that certainly look the part, with a beautiful build quality. However, the audio modification is a mixed bag. It definitely adds warmth and bass, but at the cost of clarity in the low midrange. They don’t necessarily sound better, just different—less balanced than the stock version. The instructions could be clearer about what exactly is being modified. I ran into a manufacturing issue with my unit: the screws for the plastic ring protruded slightly into the ear cup, causing the wood shell to crack during installation. I had to file down the screw and use superglue to fix the wood. Honestly, I find it a bit cheap to secure components with screws glued directly into wood, which feels out of place given the premium price point and high-end branding. Still, I’m glad the company allows for repairability, which is a plus.
The build quality and aesthetics of these headphones are genuinely impressive. However, the sound signature takes a sharp turn here. While the modification delivers a notably warmer, bass-heavy profile, it comes at the cost of clarity, particularly in the lower midrange. I wouldn't call the new sound "better," just distinctly different—prioritizing warmth and bass over balance. I was a bit disappointed by the lack of clear instructions regarding the specific mods. On my unit, the screws protruded enough to cause the wooden shell to crack when I fitted the plastic ring. I ended up filing down the screws and patching the wood with superglue to make it work. It also feels a bit ironic that a product marketing itself with a high-end image and premium price tag would rely on simple glued screws in wood. Despite that minor grievance, I’m still satisfied that I was able to restore and customize my headphones through Earphone DIY Labs.
The sound quality from Earphone DIY Labs is impressive, offering a balanced mix of detail and just the right amount of bass. I repurposed their drivers into a pair of vintage 80s Akai headphones with blown original drivers, effectively keeping the classic aesthetic while delivering modern clarity. I’m confident these custom builds outperform many store-bought models under €300.
The audio quality at Earphone DIY Labs is outstanding—crisp details paired with just the right amount of bass. I swapped the damaged drivers in my vintage 80s Akai headphones with theirs, preserving the classic look while getting a modern, superior sound experience. For the price point, these custom builds easily outperform many headphones on the market today.
Compré los Shure SE846 y están geniales. Los recomiendo al 100%.
La experiencia con Earphone DIY Labs ha sido excelente. Compré los Shure SE846 y su calidad de sonido es realmente impresionante. Sin duda, son una compra perfecta para cualquier audiófilo que busque lo mejor.
Earphone DIY Labs nailed it with these! The sound quality is absolutely epic, especially when compared to my DT770s. I was blown away by the audio performance right from the first listen.
Earphone DIY Labs really impressed me. The sound quality is outstanding, even better than my DT770s. I was genuinely amazed by the audio.
Earphone DIY Labs delivered my order in just nine days, which is impressively fast. I was pleasantly surprised to find two extra pairs of MMCX cables included, offering great peace of mind for future replacements. The performance of the Tesla drivers is outstanding. The low end is both powerful and articulate, adding depth without muddying the mids or highs. I can easily distinguish every instrument, even when the bass boost is turned up on my player. And this was right out of the box, before any break-in period. For the price, this is an exceptional value.
Shipping from Earphone DIY Labs was impressively quick, arriving in just nine days. I was also pleasantly surprised to find two extra sets of MMCX cables included, which is a great bonus for longevity. The performance of these IEMs is outstanding; the bass is tight and powerful without muddying the mids or treble, allowing every instrument to stand out clearly. Even at this stage, before the drivers have fully broken in, the sound signature is already engaging and offers exceptional value for the price.
I was thoroughly impressed by my purchase from Earphone DIY Labs. I went for the driver and G cushion kit, plus the matching headband, and all the components fitted together seamlessly. One of the best touches was modifying the cups with MMCX connectors, which makes swapping out cables a breeze. The audio performance is fantastic—vocal clarity is crisp, the highs are detailed, and the mids are well-balanced. I was particularly pleasantly surprised by the bass response; for an open-back design, the low-end performance is far more robust than I anticipated. It was a joy to put this build together, and having found a reliable source like earphonediylabs.com with all the necessary parts made the process smooth. I’m excited to see what new components this shop adds to their lineup in the future.
I recently tried the wood cups for my Grado SR80e headphones from Earphone DIY Labs, and the craftsmanship is genuinely impressive—they look great. The only real drawback is the gimbal design; the factory plastic rodblocks don't grip tightly enough, causing the earcups to slide down the headband. I found that a bit of Vaseline helps with friction, but I eventually decided to buy the "Headband and Bracket for Grado" kit to fix the issue properly. Sonically, the change is subtle but noticeable: the sound feels slightly warmer, and Grado’s sharp high frequencies are tamed a bit. If you care about aesthetics and want that minor tonal shift, it’s a worthy investment.
Shifting to the new wooden cups on my Grado SR80e was a great upgrade. The craftsmanship is excellent and they have a really premium look. My only gripes were with the gimbal mechanism; the stock plastic rod blocks don’t hold the cups tightly, causing them to slide down the headband. A quick fix with a bit of vaseline helps, but I eventually decided to buy the "Headband and Bracket for Grado" kit from Earphone DIY Labs for a more permanent solution. Sonically, the change is subtle but noticeable—there’s a slight warmth added and those harsh high frequencies that Grado is known for are toned down. If you care about aesthetics as much as sound, this is totally worth the price.
Absolutely. The sound quality is noticeably better with these. Highly recommend from Earphone DIY Labs!
Earphone DIY Labs really nailed the audio quality! These earphones deliver a noticeable upgrade in sound. Highly recommended for anyone looking to enhance their listening experience.
I’m not usually one to leave feedback, but the service from Earphone DIY Labs was so exceptional that I had to share it. On December 18th, 2019, just a week before Christmas, I ordered a pair of IE800 earbuds for my son from China. Hoping for a miracle, I emailed the seller to ask if an early delivery was possible. They responded the same day, promising to do their best and initially upgrading the shipping to DHL. When they realized FedEx was actually the faster option, they switched carriers immediately. Their attentiveness went above and beyond what I expected. The package arrived on December 23rd, right in time for Christmas morning! My son absolutely loved them, and the sound quality is fantastic. If you are looking for great products and a seller who truly cares about the customer experience, I highly recommend this shop.
I’m not usually one to write reviews, but Earphone DIY Labs truly earned the praise. Just before Christmas in 2019, I ordered IE800 earbuds for my son from their site. Being in California and knowing the stock was likely shipping from China, I emailed them to ask if an expedited delivery was possible. To my surprise, they not only agreed but quickly coordinated with FedEx to ensure the fastest possible route. The package arrived on December 23rd, right in time for the holidays. My son absolutely loved the earbuds—the sound quality is fantastic. If you’re looking for exceptional service and top-tier audio gear, this is the place to go.
I just got my Earphone DIY Labs set and they look stunning. The build quality is even better in person than in the photos. Highly recommended by me!
My new set from Earphone DIY Labs just arrived, and it is stunning. The craftsmanship actually exceeds what you see in the photos. Definitely worth the purchase if you are looking for high-end audio gear.
Brought my Audio-technica ATH-ANC700BT headphones to Earphone DIY Labs for a driver upgrade after the original unit burned out. They handled the custom installation perfectly. I had to temporarily disable the second mic for the ANC due to a feedback loop, but the sound quality improvement is immediate and excellent—I’m sure I can tweak that later. Big thanks to the support team for getting the package delivered smoothly.
I recently had a burnt driver in my Audio-technica ATH-ANC700BT and decided to take the DIY route. I sourced custom drivers and successfully soldered them into the headset. I temporarily disabled the second microphone to avoid a feedback loop, but the audio quality is excellent in the meantime. Big thanks to the team at Earphone DIY Labs for the smooth delivery process. Highly recommend for anyone looking to revive their gear!
Earphone DIY Labs delivered an exceptional experience with this Mini Piano kit, especially when paired with the Tesla drivers and 7N OFC braided cable. The build quality is stunning and feels thoroughly crafted. Initially, I was a bit underwhelmed—the bass felt a bit heavy and the soundstage lacked some air—but I trusted the burn-in process and let them play on their own. After about seven hours, the transformation was clear. The sound opened up significantly, becoming much more listenable and transparent, while the bass leveled out and became more controlled. Once fully broken in, the sound is truly outstanding. The signature is neutral with a slight warmth, offering a smooth treble without excessive sparkle. The balance across bass, mids, and treble is excellent and linear. The bass is full and textured, the mids are natural with clean, accurate vocals, and the treble is silky smooth. The detail retrieval is high but presented in a musical, rather than overly analytical, way. The soundstage is spacious and transparent, with precise imaging. One thing to note: the shell lacks a front vent and has a bit of driver flex, though it’s a slight noise rather than a harsh pop. Fit is crucial; inserting them too deep can create pressure that restricts driver movement and alters the sound. A proper seal is needed for optimal performance. My preferred technique is to insert them deeply and then pull them out slightly to stabilize ear pressure. Overall, these IEMs offer a musical, warm-neutral signature with clean bass, amazing mids, and a linear, spacious soundstage. For the size and sound quality, the value is huge. Highly recommended!
I ordered the Mini Piano kit featuring Tesla drivers and 7N OFC braided cable from Earphone DIY Labs, and the build quality is genuinely impressive. Initially, I was a bit underwhelmed; the bass felt a bit boomy and the soundstage lacked some air. But knowing I believe in burn-in, I let them sit for about seven hours. The change was night and day. Once broken in, the transparency opened up significantly, and the bass settled into a much more controlled groove. The final sound signature is neutral with a subtle warmth. It isn’t overly bright or sparkly, but rather beautifully balanced with a linear presentation. The bass has incredible texture and fullness, the mids are natural with clean, accurate vocals, and the treble is silky smooth. It’s detailed without being overly analytical, offering a more musical experience. Imaging is precise, and the soundstage feels spacious. Regarding the shell, it lacks a front vent and has slight driver flex, but the noise is minor and not alarming. Fit is crucial here; if inserted too deep, pressure builds up and can restrict driver movement. I found the best technique is to push it in deeply and then pull it back slightly to stabilize the pressure. Overall, these offer a big, completed sound with outstanding value. Highly recommended.
I’ve been using the Earphone DIY Labs with the 10mm Tesla driver for a few months and recently compared it to my previous ie800 with an 8mm Tesla driver. It’s tough to pick a favorite; the DIY Labs shell offers a slightly warmer sound with a narrower soundstage and is much more forgiving during long listening sessions. While the ie800/8mm feels more audiophile-grade, it struggles with lower-quality recordings. Overall, I highly recommend these as a competitive option in the mid-to-high-end market, easily holding its own against my original ie800 and IMR-R1.
I’ve been using these from Earphone DIY Labs for a few months now, testing them against my old IE800s. While the IE800s with their 8mm Tesla drivers sound a bit more high-end, the 10mm Tesla drivers in the DIY Labs version offer a warmer tone and a narrower soundstage. The real winner for me is the comfort; I experience less listening fatigue with these during long sessions, whereas the IE800s can be a bit unforgiving with lower-quality tracks. I usually compare these against my IE800 and IMR-R1, and I believe the DIY Labs iems hold their own as a strong mid-to-high-end option.
I recently upgraded my Audio Technica ATH-M2X headphones by installing drivers from Earphone DIY Labs. Since the M2X shells already house 40mm drivers, it was the perfect canvas for these custom replacements. The sound quality is fantastic—much richer and more detailed than the stock parts. One crucial tip for anyone attempting this mod: check the polarity carefully. My unit didn’t have markings on the back, and I had to figure out that the right side is positive when looking from the rear. Initially, I wired them backwards, which sounded pretty generic, but reversing them fixed the issue immediately. I also sealed the housing with plumber’s putty to add some necessary stiffness to the cups. For a shipment originating from China, the delivery was impressively fast, arriving in under ten days. The team at earphonediylabs.com even tossed in some free samples I’m eager to test. Communication is top-notch as well; they respond to emails very quickly. Given the quality and service, I’ll definitely be coming back for future audio projects.
I purchased an affordable pair of Audio Technica ATH-M2X headphones for $25, primarily because they already featured 40mm drivers that were easy to replace. After installing the drivers from Earphone DIY Labs, the audio quality transformed into something wonderfully rich. A small tip for fellow DIYers: watch out for the polarity. My unit lacked clear markings, and I had to figure out that the right side (viewed from the back) was positive. I initially wired them backward, which resulted in the same muddy sound as the stock drivers, but fixing the polarity solved the issue. I also reinforced the housing cups using plumber’s putty for added stiffness. Shipping from Earphone DIY Labs was impressively fast at under 10 days from China, and they threw in some free samples I’m excited to test later. Their customer support is also very responsive via email. I’ll definitely be coming back for future projects.
Just received my custom ETYMOTIC ER4p from Earphone DIY Labs and I’m thoroughly impressed. Coming from Shure SE425 and SE535 models, I didn’t know what to expect, but the craftsmanship here is top-notch. The build quality and included cable are excellent. On the audio front, these definitely outshine my SE535s—the sound is noticeably more accurate and clearer. If you are on the fence, I highly recommend giving Earphone DIY Labs a try.
Picked up the Royal Blue IE800s from Earphone DIY Labs about two weeks ago, opting for the silver cable upgrade and those impressive 8mm Tesla drivers. Since I didn’t have any IE800s to compare them against, I relied on my past gear—specifically the IE80 (which I sadly broke, leading me to this purchase), plus the SE535 and SE425. Honestly, the IE800s with Tesla drivers completely outshined all three of those insoles. If you are looking for top-tier sound, I highly recommend these. Big thanks to the team at Earphone DIY Labs for the quality; I’ll definitely be placing more orders soon. Five stars!
Earphone DIY Labs offers a solid upgrade for Grado headphones at a fraction of the cost of boutique alternatives. The metal construction gives it a premium feel, and the added padding significantly improves comfort on heavy models like the SR325. However, be prepared for a bit of a hassle during installation. The nut-and-bolt mounting system can be tricky to tighten perfectly without flexing the yoke, which risks scratching the cups if you rush it, as I unfortunately did. Also, the height adjustment is initially quite stiff and may creak, though it seems stable once set. If you use G-cush pads, watch out for hair getting caught in the metal gimbal. Despite these minor quirks, it feels like a durable, long-lasting solution that outperforms standard plastic parts without breaking the bank.
As a solid upgrade for Grado headphones, the Earphone DIY Labs replacement headband offers excellent value compared to pricey custom options. The extra padding on top really improves comfort, especially with heavier models like my SR325. The all-metal construction gives it a premium feel, though there are a few things to keep in mind. Attaching it involves a nut and bolt system that fits snugly against the cups, making the process a bit fiddly. I found I had to constantly adjust the tension and carefully flex the yoke over the cup; doing it too fast can lead to scratches, as I unfortunately discovered. The height adjustment mechanism is quite stiff initially and creaks a bit, but it locks firmly in place and should likely smooth out with use. Also, be cautious if you use G-cush pads, as hair can get trapped between the pad and the metal gimbal, causing a tug when you take the headphones off. Despite these minor quirks, this seems like a highly durable, long-lasting alternative to standard Grado plastic bands that won't break the bank.
Buying from Earphone DIY Labs was a great choice. The sound is incredibly precise, easily surpassing the clarity of the Shure SE215, and that crisp, detailed audio is unmistakably the Sennheiser signature.
If you are looking for compact headphones with 40 mm drivers that won’t break the bank, Earphone DIY Labs is a solid choice. I actually sourced a pair of Skullcandy "Lowrider" shells from a thrift store, which felt more like a treasure hunt than a simple purchase. The most challenging part was carefully extracting the original drivers without damaging the casing, but with some basic soldering skills, the result was a lightweight custom set. I let the drivers burn in for about 72 hours, intermittently adjusting the volume while connected to my iPad (various generations) via a Fiio E17K Alpen 2. While some debate the necessity of burn-in, I definitely noticed an improvement in sound quality, though personal preference always plays a role. The audio performance is impressive: deep, tight bass that you can physically feel rather than just hear, without becoming muddy or overpowering other frequencies. Male and female vocals remain clear and natural, never harsh. I found them comfortable enough for extended listening sessions, which is a significant upgrade from my previous Sony MDR-7506s, which tended to make my ears feel warm after a while. I tested them through my vintage NAD preamp and Adcom GTP-500II setup as well. I currently own a variety of headphones, including the Sennheiser HD 414, Koss Porta Pro, Koss KSC75, Mee M6, and Mee M6 Pro, but I have set the AIAIAI Track-Pipe-TM2 aside because its sound signature isn’t to my taste. Since I enjoy bass-heavy tracks ranging from classic to rock, these DIY builds fit my preferences perfectly. Highly recommended!
I was looking for a compact 40mm driver headphone that wouldn't break the bank, and Earphone DIY Labs provided the perfect platform for my project. I found a SkullCandy "Lowrider" shell at a thrift store—it’s basically a treasure hunt to find the right base. The trickiest part was carefully removing the original drivers without damaging the housing, but with some basic soldering skills, I successfully installed the new units. After a 72-hour burn-in period using an iPad and a Fiio E17K Alpen 2, the results were worth it. While burn-in is subjective, I definitely hear a difference. The sound signature is excellent: deep, tight bass where you can physically feel the impact rather than just hearing it. It remains clean and doesn't muffle other instruments, with clear male and female vocals that aren't harsh. Compared to my Sony MDR-7506, which now gets a bit warm during long sessions, these new DIY headphones are more comfortable for my ears. I also tested them through my vintage NAD preamp and Adcom GTP-500II. Out of my extensive collection—which includes the Koss Porta Pro, Mee M6 Pro, and AIAIAI Track-Pipe-TM2—I prefer this setup because it delivers the bass-heavy, fun sound I love for everything from classic to rock music. Highly recommended!
I’m really impressed with the earphones from Earphone DIY Labs. I went with the crystal finish because it looks so elegant. What’s fascinating is how the sound signature varies between the left and right units; since one of my ear canals is slightly larger, I actually ended up swapping them to get the best fit for each side. After letting them burn in for about 72 hours, the audio quality definitely improved. Keep in mind that sound is subjective, but I found the bass reproduction to be excellent. Having tried many different headphones and earphones over the years, I can confidently say this pair offers a win-win scenario for the price. I’m completely satisfied with my purchase.
I’m really enjoying my new pair from Earphone DIY Labs. I went with the crystal color, and they look fantastic—very elegant. What surprised me most is how distinct the sound profile is between the left and right earbuds; it’s like two different sounds. It turns out I have one ear canal that is slightly larger than the other, so I actually ended up swapping the ear tips to fit each ear better. After letting them burn in for about 72 hours with intermittent use, the audio quality definitely improved. Of course, sound taste is subjective, but for this price point, it’s a total win-win. I’ve owned plenty of headphones and earphones over the years, and I’m particularly happy with the bass response on these.
I was pleasantly surprised by the audio quality; it matches my original SE215s perfectly. Earphone DIY Labs made the experience seamless with fast delivery and responsive support. It’s easy to see why I’ll be coming back for more custom gear.
Earphone DIY Labs deserves a perfect 5-star rating! I’m thrilled with the experience and would love to hear your thoughts too.
A solid 5/5 from me at Earphone DIY Labs! I’ve been really enjoying the sound quality and build of their custom gear. Highly recommend checking out earphonediylabs.com if you want a personalized listening experience.
News
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
Widgets
Get the widget for your site →About Earphone DIY Labs
- Website
- earphonediylabs.com