Bought a replacement connector from DIYAutoTune.com after I messed up the pins on an old part. Works perfectly now, all connections are solid. Solid gear from this shop.
What reviewers say about Diyautotune.com
What does Diyautotune.com do?
Diyautotune.com sells fully assembled engine management systems like MegaSquirt, MS3Pro, and MSPNP, along with standalone fuel injection and high-performance parts for tuning racecars.
Are there any complaints about Diyautotune.com?
The critical reviewers wrote that customer service was not the best and they were notified late about a detail regarding an LS1, while another reviewer suggested using the LS1 intake directly instead of continuing with a TBI setup.
What do people say about Diyautotune.com outside Trustburn?
Outside Trustburn, people mention that the company sells V3 kits and MS2 daughterboards, and they are recognized for providing plug-and-play solutions and custom wiring harnesses for Megasquirt installations.
AI-generated from reviews on this page. Verify anything important with the company directly.
Couldn't figure out what caused the 5v and 12v fuses to blow, but these replacement parts fit my MS3Pro perfectly. I grabbed a few extras from DIYAutoTune.com just in case. Highly recommend!
Picked up two weather packs and four connectors for my drift car at DIYAutoTune. Two of them handle the MS3 Pro while the others power the rest of the setup. Fantastic value and a solid addition to my build!
I needed to upgrade my setup with extra ignition outputs, and the resistors from DIYAutoTune.com were exactly what I was looking for. They replaced my old ones perfectly. Great quality, five stars!
Great quality sensor that performs exactly as expected. Installation and setup were straightforward, offering the same ease as a standard threaded version. A solid addition for anyone working with MegaSquirt or MS3Pro systems.
I forgot to apply a promo code at checkout, but the team at DIYAutoTune.com were kind enough to honor the discount for me. Really appreciated the help with my MegaSquirt order. Five stars!
👌 The customer service at Diyautotune.com is top-notch. They are always prompt in responding to my inquiries and are very knowledgeable about their products. The website is user-friendly and the checkout process is smooth. I have had nothing but positive experiences with Diyautotune.com and will continue to be a loyal customer.
I have had a great experience with Diyautotune.com. The customer service team was very helpful in answering my questions and providing guidance for my purchase. The shipping process was also quick and hassle-free. I would highly recommend Diyautotune.com to anyone in need of automotive parts.
Solid multi-mount wheel that worked perfectly on my late model Ford 5.0 Windsor. I did have to grind out the slots to clear the larger bolt, but once that was done, it bolted up perfectly. Really happy with the quality of the part and the speed of shipping from DIYAutoTune.
DIYAutoTune.com delivered exactly what I ordered. The MSPNP and LC-1 arrived quickly and were well packaged. Customer support was on point, keeping me in the loop throughout the process. As a long-time fan of the Mega Squirt platform dating back to the MS1 era, I’m really looking forward to getting my laptop ready and diving back into tuning. Solid experience from start to finish.
I have been a customer of Diyautotune.com for a while now and I have to say, their products and service are exceptional. The website is easy to navigate and the checkout process is simple. The products are of high quality and they always arrive on time. I highly recommend Diyautotune.com to anyone in need of automotive parts.
I’m absolutely blown away by this 2003/2004 Cobra ECU from DIYAutoTune. Even though I was a total beginner when it came to engine management, their massive community and resources had me tuning up and running in no time. The support team is super responsive and willing to help with any questions you might have. Easily one of the best investments for any Mustang enthusiast looking to get into standalone fuel injection and tuning.
I switched exclusively to DIYAutoTune for my components after a disappointing experience buying a pigtail elsewhere. I run a 1997 Cobra DOHC with nitrous in my Factory Five kit car, controlled by a Microsquirt AMP'd, and their hardware has never let me down. The MegaSquirt and Microsquirt units I’ve purchased from them always work right out of the box. Plus, their technical articles are incredibly thorough, which saves me a ton of research time. On top of that, their support team is quick to respond whenever I need assistance.
Truly impressive hardware! The MS3Pro unit arrived fully assembled and ready to go, which was a huge plus. It works exactly as promised and lives up to the "plug and play" reputation. Highly recommend for anyone serious about engine management.
I recently bought some parts from Diyautotune.com and the experience was excellent. The parts were of great quality and the prices were very competitive. The website was easy to navigate and the checkout process was seamless. Overall, I am very satisfied with my purchase and would highly recommend Diyautotune.com to others.
If you’re dealing with that finicky VR sensor on a BMW M20, I highly recommend this upgrade from DIY Auto Tune. I’ve been using it in my MegaSquirt setup for years and the signal is rock solid now. Just be prepared to do some minor modifications: the unit is slightly longer than the stock part, so I fabricated a spacer, and you’ll need to shave down the mounting bracket where it hits the engine block to properly center it. Honestly, given the price, it’s much easier to modify the bracket and install this sensor than to keep struggling with the original VR unit.
I recently purchased some parts from Diyautotune.com and I am extremely satisfied with my experience. The ordering process was seamless and the parts arrived on time. The quality of the parts is excellent and they fit perfectly in my vehicle. I will definitely be a repeat customer.
👍 I recently placed an order with Diyautotune.com and I couldn't be happier with my purchase. The product arrived quickly and it was exactly what I needed. The quality of the product is outstanding and the price was very reasonable. I will definitely be ordering from Diyautotune.com again in the future.
Finally found the perfect upgrade for my old MS2. The new setup looks fantastic, and every component arrived right out of the box, completely brand new.
I recently made a purchase from this online store and I must say that I am very impressed. The quality of the products I received exceeded my expectations and the prices were very competitive. The shipping process was also quick and hassle-free. I would definitely recommend this store to others looking for automotive parts.
👍 I love shopping at Diyautotune.com. Their website is user-friendly and easy to navigate. The product selection is extensive and the prices are very competitive. The customer service is also top-notch. I had a minor issue with one of my orders and they resolved it quickly and efficiently. I will continue to shop with them in the future.
I recently purchased the DB 15 pigtail for my MS3X and it fits perfectly. Assembly was straightforward and it functions flawlessly. Highly recommend for anyone looking for reliable components for their MegaSquirt setup.
I was impressed by how straightforward the installation was on my boosted Toyota 22rte running at 20 psi. The driveability is excellent.
As someone new to engine management systems, I was initially unsure about buying an ECU online. DIYAutoTune made the process incredibly smooth thanks to their clear, step-by-step instructions, which helped me get the MegaSquirt unit running with impressive accuracy right out of the box. The support team was also fantastic, answering all my questions patiently. I am thoroughly impressed with their standalone fuel injection solutions and high-performance parts. I’ll definitely be returning to DIYAutoTune.com for my next project without hesitation.
Incredible hardware from DIYAutoTune! I’m on my second build with their controllers this year—first the 2015 RZR and now the LTR450. While the software can be a bit glitchy and might test your patience if you hate minor hiccups, I absolutely love the end product.
DIYAutoTune delivered a fantastic standalone ECU. The MegaSquirt unit is incredibly compact yet packed with features, offering the flexibility I needed for my racecar. The hardware quality is top-notch.
The customer service at Diyautotune.com is excellent. I had a few questions about their products and the staff was very helpful and knowledgeable. They were able to guide me in the right direction and help me choose the right parts for my project. I am extremely satisfied with my experience and will definitely be a return customer. Highly recommend Diyautotune.com!
After mastering the MS2, I knew I needed to upgrade to fully utilize the MS3's potential. The improved table resolution and the ability to use COP drivers were the deciding factors for me, especially since I’m planning to pair it with LS2 coils on my turbo setup. DIYAutoTune delivered exactly what I needed—the MS3Pro is an absolute winner. Great service, thank you!
Absolutely thrilled with the MegaSquirt system! It worked perfectly right out of the box, which is a huge contrast to that cheap $48 replacement from Staples that was too short and completely useless. DIYAutoTune has consistently delivered quality over the years, and the team deserves kudos for their reliability.
Massive thanks to the team at DIYAutoTune for your excellent products and top-notch professionalism. Their after-sales support is incredibly efficient. Highly recommend for anyone looking for reliable standalone fuel injection and engine management systems!
Our ChampCar team, Running Bulls Racing, has trusted DIYAutoTune for years, and our MS2 ECU never let us down during races. Recently, we upgraded to the MS3Pro system from their shop in the US, and it has been flawless so far, including a successful 10-hour endurance run. Switching to a new engine was smooth, and dialing in the tune was straightforward. We are thrilled with the new features and look forward to using the added safeguards to keep our E30 competitive. Highly recommend for anyone needing reliable standalone fuel injection and tuning support.
I have been a customer of Diyautotune.com for a while now and I am always impressed with their products and service. The products are of high quality and the prices are very reasonable. The customer service team is friendly and knowledgeable. I highly recommend Diyautotune.com for all your automotive needs.
I have been a loyal customer of Diyautotune.com for years and have always been impressed with their products and service. The quality of their products is superb and the prices are very reasonable. The customer service team is always friendly and helpful. I highly recommend Diyautotune.com to any car enthusiasts out there!
It’s a relief to see DIYAutoTune.com still in the US market offering these specific standalone engine management systems. You really can’t easily find MegaSquirt and MS3Pro setups like this anywhere else.
The boost numbers on my MS3X-powered supercharged Mustang didn't match the advertised specs, and I figured the belt was slipping. I decided to install this sensor, attaching a small steel washer shard to the back of the aluminum pulley with epoxy and setting the input to "Shaft speed sensor." It immediately showed that the belt wasn't the issue at all. Another excellent addition to my DIY AutoTune setup!
Upgraded my 1988 325is with DIYAutoTune’s engine management solutions, and the result is fantastic. Getting my car to this level of modern performance tech was exactly what I needed.
I’m thrilled with the DIYAutoTune upgrade for my turbo Miata. After struggling with LS coils, this kit was a breath of fresh air. The MegaSquirt system comes with everything you need—clearly labeled hardware, brackets, coils, and wires—so there’s no need to buy extra parts. I had it up and running in under an hour and a half on wasted spark, thanks to the precise dwell settings listed right in the manual. No more digging through forums or Googling for answers! The included secondary harness makes switching to sequential ignition a breeze and is fully reversible. Best of all, I haven’t had a single issue in nearly two weeks. If I’d known about this plug-and-play solution back when I first built the car, I would have skipped the LS coils entirely. Highly recommended for anyone looking to streamline their tune.
The DIYAutoTune package arrived incredibly fast. I got everything wired up, made a couple of adjustments, and loaded the tune—it started right up without a hitch. Installation was a breeze, and I’m thrilled with the results. Highly recommend!
The MegaSquirt setup was truly plug-and-play, and tweaking the parameters in Tuner Studio made a noticeable improvement. I even managed to mess up the settings by clicking the wrong button in Tuner Studio, but Matt Kramer guided me through the fix almost instantly. It’s rare to find such attentive support. He’s easily a hero to me, and I’ll definitely be looking into buying more high-performance parts and standalone injection systems from DIYAutoTune in the future.
Absolutely blown away by this kit! If you’re a backyard enthusiast like me, do yourself a favor and read every single file on that flash drive. The DIY Auto Tune materials are tailored specifically to the hardware you bought, unlike the generic advice you might find on YouTube or forums. I actually ran into some hiccups because I relied too much on other people’s experiences instead of following the provided documentation. Patience is key—don’t rush the process. I’m using this on my stock Miata, planning to add fuel and ignition upgrades for turbo applications. While the base map runs a bit rich, that’s totally expected since you need to fine-tune it for your specific setup. You can’t perfectly tune a car without having it in front of you. For a plug-and-play standalone engine management system, especially if you’re new to MegaSquirt, this is the way to go. Huge thanks to the team and tuners for making this accessible and reliable.
Bob Burden 5.0 out of 5 Pleasantly surprised by the service at DIYAutoTune.com. I ordered a custom-built Amp'd Microsquirt and was given a clear timeline upfront. Not only did they meet the expected shipping date, but my order arrived even earlier! It’s refreshing to deal with a team that delivers on their promises. I’ve spent weeks poring over the extensive documentation on their site, and it’s clear they have answers for almost any sensor or engine combo you can think of. I’m really looking forward to getting this setup running.
Installing the MegaSquirt system was surprisingly straightforward. It plugged right in and fired up perfectly right out of the box. Great quality product from DIYAutoTune.com.
I recently purchased a plug-and-play system from DIYAutoTune and initially struggled to get my car to start. I reached out to their US-based support team and was impressed by the speed and thoroughness of their response. They answered every single question I had with great detail, helping me identify and fix the problem quickly. The service was excellent, and I highly recommend them. I’ll definitely be buying from them again!
As a first-time DIYAutoTune user, I didn't have much experience with the MegaSquirt setup, but their technical support team made the process smooth and helped me get started. The system handles everything I need it to do, and I am really enjoying it so far!
I installed this Hall effect sensor for my M54B25 turbo build and it did the job perfectly. My stock sensor, located near the starter, wasn’t compatible with the MegaSquirt ECU, which caused issues with RPM detection. After researching, I found this sensor to be the best fit—same diameter, just slightly longer. It required minor machining on the mounting hole and base to fit correctly, but once installed, it worked flawlessly. Great product from DIYAutoTune for anyone needing a reliable solution for BMW applications.
DIYAutoTune.com delivered exactly what I needed when others fell short. After struggling to find a working sensor elsewhere, the team here sourced the correct components that performed flawlessly. While the dyno downtime was costly, their efficiency got us back on the track and making passes. A huge win for DIYAutoTune!
After comparing a few options for an O2 sensor, I decided to stick with DIYAutoTune.com because of their solid reputation and competitive rates. They even went above and beyond by applying a Black Friday discount retroactively after I realized I’d forgotten to add the promo code. It’s great to support an automotive repair shop that treats customers this well.
Great wiring harness for my MS2 setup at DIYAutoTune. The wire quality is solid and I appreciate the color coding. However, the labeling was a bit of a letdown. The ink seemed to bleed into the insulation, making it blurry and hard to read on many wires. It would have been much better if they had used white ink on the darker wires to improve contrast. Also, keep in mind that pin functions can vary depending on your specific configuration, so I had to cross-reference with the MS2 manual since the included list was only partial. Overall, still a useful addition to my automotive repair kit.
I was pleasantly surprised by how straightforward the installation process was, even though I’m a total beginner and didn’t have any fancy tools on hand. DIYAutoTune made it easy to get started, and I’m really happy with the results so far.
I want to extend a big thank you to Jerry and the team at DIYAUTOTUNE USA. My order was packaged with care and arrived right on schedule. I picked up the Amp'd Micro-squirt kit for my re-phased XS650 EFI project. Since this was my first conversion, I found the included manuals to be incredibly clear and helpful. Great work keeping the innovations flowing!
Building a MegaSquirt system with DIYAutoTune parts was a smooth experience. The wiring harness I bought was straightforward to assemble, and even though the ink on a few labels was slightly smudged, the information was still legible. I noticed many people complain about the missing wire list, but it’s actually right there in the hardware manual for your specific MS3x model. Since you’re already reading that guide to understand triggers, coils, and injectors for the build, you’ll find the wire numbers, colors, and signal descriptions near the start of the document. My advice is to read through the manual twice: once for a general overview and a second time to take notes on the specific components you plan to use, like logic coils or high-impedance injectors. That info will be invaluable when you’re connecting the harness. Overall, this bundle was worth every penny and made the whole process much easier.
I swapped out my aging GM D585 coils for the MegaSquirt setup from DIYAutoTune.com just before swapping my Garrett-clone turbo for an EFR. I was tired of hunting down reliable replacements for the old GM parts, which seemed to fail randomly. Online "OEM" options are often a gamble, and driving to a junkyard isn't always practical. Once I saved up enough, I ordered this kit. The install was smooth, except for wrestling that "hot" wire into the main fuse block. Everything else clicked in perfectly, and I’m glad I didn't mess up the original wiring harness. Getting things running in TunerStudio was super easy too. The engine fired up immediately and is performing flawlessly. Easily the smoothest mod I’ve done to my '99 NB1. Big thanks to the DIYAutoTune team for such a solid product—I’m expecting years of trouble-free use from it.
My 2004 Mazdaspeed Miata has a heavy-duty bottom end build featuring BP heads, 84mm pistons, 10:1 compression, and 1300cc injectors. I was struggling with severe spark blowby at 25psi on E85 while using a competitor's LS Coil PnP kit. I switched to this DIYAutoTune kit, and the issue completely disappeared. The installation guide was accurate, and they handled the sequential wiring perfectly. A solid 10/10 recommendation.
After six months of wrestling with my VR Crank sensor and Maxx conditioner to get a reliable signal on my Speeduino ECU, I finally found a real solution. I switched to the DIYAutoTune Hall Effect sensor for my BMW M44 engine and the difference was immediate. Unlike my old setup, this sensor has the internal pull-up resistor built right in, so I didn’t even need to add one externally. I plugged it in, tightened the bolt, and instantly got a perfect square wave on the scope. It just works, every single time. Now I can trust my crank signal completely and focus on tuning without worrying about tooth logging errors. If you need a Honeywell 101-sized crank sensor, this is hands down the best option out there.
I recently ordered a fully assembled harness from DIYAutoTune.com and was thoroughly impressed by the quality. The labeling is precise and the build quality ranks among the best I have encountered. After struggling with three attempts at building my own harness for GM coils, I realized that paying for a professionally manufactured product is well worth the effort. The included instructions are also top-notch; most issues I encountered were simply due to missing details I had overlooked while reading. It is also refreshing to see DIYAUTOTUNE conduct its own research into IGN-1A coils, rather than relying on the user-derived TunerStudio configurations that were common for GM LS coils in high-performance MX5s.
The interface is remarkably intuitive, making it easy to get started without a steep learning curve. Tunerstudio is also a breeze to master.
I was a bit worried about getting the hang of crimping the barrel and seal separately, but this tool from DIYAutoTune is actually very easy to use. It produces excellent, reliable crimps every time. Highly recommended for anyone working with their MegaSquirt or MS3Pro systems!
Unboxing my DIYAutoTune order felt like Christmas morning. If you are on the fence about switching to MegaSquirt, just do it. Their support team is incredibly fast at getting back to you with answers.
These tools are so handy and affordable that I actually cut up my first purchase to reuse them, which is why I ended up buying two packs this time. DIYAutoTune always includes a personal note of thanks, though I’d say we should be the ones thanking them. In my opinion, they are the best tuners around. It’s smart to skip overpriced options from big brands that barely know how to handle the system anyway; I’d rather stick with affordable general tuners like these than waste money on expensive alternatives.
I used one of their sensors for a custom motorcycle inertial dyno setup, pairing it with an LM2 and Logworks to track exhaust gas analysis alongside RPM, torque, and power. The unit ran flawlessly for over four years and more than 300 power runs on unleaded gasoline. Eventually, it failed because exhaust condensation caused saturation, but that was due to my own error in positioning the exhaust probe rather than a defect in the hardware. I ordered a replacement from DIYAutoTune, and they shipped it out incredibly fast, even though it was during the busy Christmas and New Year period. I was really impressed with both the durability of the original part and the quick, efficient service from the team. Highly recommend!
Great job on the wiring harnesses at DIYAutoTune. The fuel injectors, coil, and extended sensor leads all feature matching color coding and clear labels, which makes the installation so much easier.
Installing the DIYAutoTune hardware was a breeze, and it provides a rock-solid, accurate signal for my MegaSquirt 2. Thanks to this upgrade, the autotune feature in TunerStudio is finally working as intended. Solid performance from the shop.
I was looking for a stainless IAT sensor bung to complete my Flyin Miata intercooler pipe setup, but finding the right fit locally proved impossible since my piping was also stainless. I turned back to DIYAutoTune.com, the go-to shop for my MegaSquirt gear. They shipped the part out quickly and provided the excellent, consistent service I’ve come to expect. It’s great to have them as a reliable support resource for my build.
I’m on the DIYAutoTune team. Thanks for the review! We’re glad you found the wire quality and labeling to be top-notch. You’re right that the upfront cost is higher than the short harness, but it definitely saves you time and trouble in the long run. We totally get why the long harness is the better choice now!
I’ve been running a PNP2 kit on my turbo E30 for years, so I naturally chose to install the same unit in my ’85.5 944 after swapping in a 16v engine. I didn’t even bother adjusting the base fuel settings, and it fired right up and ran perfectly. While I expected the ECU to perform well out of the box, I was genuinely impressed by the quality of the base maps provided, even though they were configured for an S2 3.0. After some minor tweaks and removing the AFM, the car feels faster and smoother than ever. This is my second time buying from DIYAutoTune.com, and I’m completely satisfied with the product and the service.
Most budget options on the market just don’t fit as precisely, which often leads to those annoying intermittent connection glitches. For me, paying double for a product that actually does what it’s supposed to is a no-brainer. DIYAutoTune is really making waves in the tuning community by prioritizing quality. It’s refreshing to find high-performance parts for our racecars that truly work as advertised.
For anyone using a MegaSquirt ECU, skip the hacky workaround of cutting up a USB adapter. It just forces you to keep the computer right next to the car anyway. Do yourself a favor and buy this cable—it’s the proper way to connect and get it done right.
Getting the MegaSquirt system installed and calibrated was a breeze. I just finished a complete rebuild on my Volvo B20 and did a dyno tune, and the car performs like brand new. It’s been a fantastic experience bringing this 50-year-old machine back to life.
After working with over 100 of their plug-and-play ECUs, I can confidently say DIY Auto Tune delivers exceptional quality at a reasonable price. Their customer support is top-notch, and pairing their hardware with the incredible flexibility of Tunerstudio makes it hard to look elsewhere. It’s become my absolute go-to choice for ECU solutions across all my NA and NB Miatas.
The trigger wheel from DIY Auto Tuning offered excellent value for the price and featured versatile mounting options. Their customer service was top-notch, and the order arrived quickly. I’ve come to rely on DIY’s support for my automotive projects, and they continue to deliver quality parts and assistance.
I recently used the wiring kit from DIYAutoTune to rebuild the EFI harness on my 1989 Ford Mustang, and it was exactly what I needed. While I was left with a few spare wires and would have liked the power and ground cables to be included, the sheer variety and length of high-quality wire make this kit hard to beat. If you are looking for the best option to create or restore an EFI harness, this is it.
As a repeat customer of DIY Auto Tune, I’m pleased with this wiring bundle. It offers more length than needed, which adds great flexibility for installation. The only minor issue is that the wire markings are quite small, making them hard to read without a magnifying glass or a zoomed-in phone camera. It would have been helpful if the bundle included a color-to-wire identification chart; I managed to find one online, though. I appreciate that they have updated this version to include shielded wire, an improvement over the set I purchased a few years ago.
Got the MegaSquirt MS3Pro setup in my '87 Porsche 944S in no time. Hooking it up took about half an hour, and after tweaking the req_fuel in Tunerstudio, it fired up instantly on the stock base map. It’s running a bit rich right now since I still need to install the remaining sensors and dial in the tune, but it’s already performing so well that I couldn’t give the team at DIYAutoTune a lower score. If you’re adding new sensors, definitely grab the MS wiring bundle—it’s worth it. Highly recommended!
Got my MS-II daughter board from DIYAutoTune.com without any issues. The pricing was fair, and it arrived promptly via economy shipping. Would recommend for reliable service.
I’ve integrated DIYAutoTune’s MicroSquirt controllers into multiple twin-turbo Dodge Dakota R/Ts paired with GM 4L80E transmissions, and they’ve performed flawlessly when tied into Megasquirt DFI. We even retained the original column shifters by fabricating custom linkage to keep the dash display functional. They also handled a twin-turbo Ford Mustang conversion where the previous FiTech system just didn’t offer the tunability we needed. By keeping the FiTech throttle body and wiring in the MicroSquirt, we achieved the precise control our customer required without breaking the bank. Highly reliable and flexible solutions from DIYAutoTune!
The MegaSquirt unit from DIYAutoTune.com works well, but the bolt holes on my ATI damper didn't line up perfectly. It would have been really helpful if they had provided a reference diagram showing the hole spacing in half-inch increments. I managed to make it fit, though the result isn't as neat since only one bolt sits inside the slot. I’m planning to buy a solid face wheel for my 88 Supra with the 7M-GTE engine to fix this. Overall, good product quality, just needs better documentation for the mounting holes.
I was really impressed with the MegaSquirt module; my tests showed it works perfectly, and the price was even lower than what local shops were charging.
I can’t say enough good things about these fully assembled MegaSquirt boxes from DIYAutoTune—they are flawless right out of the box. We’ve dealt with other branded Megasquirt products in the past that came with plenty of headaches and subpar support, so the difference is night and day. We stick with DIY boxes for our builds because they perform reliably, and knowing we have solid US-based support if anything goes wrong makes all the difference.
I’ve got a DIYAutoTune system running in my ’90 Fox Body with a built 351W, and it fired up in under ten minutes after installation. Since this was my first time tackling EFI tuning, the whole process turned into a genuinely fun learning curve. The TunerStudio Pro software is absolutely worth the extra $100, and the engine management hardware is top-notch. Big thanks to Matt in tech support for being incredibly helpful whenever I hit a snag. If you’re looking for reliable standalone fuel injection parts and amazing customer support, I highly recommend DIYAutoTune!
DIYAutoTune is a solid choice for high-performance parts and tuning solutions. This sensor has proven to be extremely reliable. I’ve purchased various products from their shop and consistently found their customer service to be top-tier. Highly recommended for anyone looking to upgrade their engine management system.
I can't imagine running my racecar without one of these! If you don't have a spare MegaSquirt or MS3Pro on hand, you are definitely in trouble when things go wrong. I give this a full five stars because I keep spares ready to go. These units are incredibly robust and rarely fail on their own—they only let go if I push them past their limits with a tuning error.
The wiring in this bundle is clearly labeled and color-coded, which makes it super easy to avoid any mix-ups. It’s perfect for building a clean, professional-looking patch harness. Great quality as always from DIY AutoTune.
The DIYAutoTune MegaSquirt arrived fully assembled and perfectly paired with my MS3X setup. Everything was included, and the packaging was neat and secure.
I’ve installed more than twenty DIYAutoTune PnP units on Ford Mustangs across a wide variety of setups, from high-output turbo builds pushing over 700 horsepower to naturally aspirated street and drag cars around 400 hp, complete with air conditioning. The onboard features are outstanding—specifically the boost control, idle management, 2-step, flat-shifting functionality, and nitrous strategies. In my opinion, this is the best solution available at this price point.
Le système est prêt à l'emploi et s'installe très rapidement, en une quarantaine de minutes. Chez DIYAutoTune.com, la qualité des composants pour la gestion moteur est vraiment au rendez-vous. Je recommande vivement cette boutique pour vos pièces de performance automobile.
I installed the MS3Pro in my ’81 Bronco, which is running a turbo’d 331 stroker with AFR 205 heads and 60 lb injectors. The unit arrived with a pre-loaded map for a stock Foxbody 5.0, so I had to adjust the parameters to suit my build, which is pretty standard. The autotune feature is fantastic; once I connected my wideband and set the target AFRs, it was just a matter of driving to dial it in. This is actually my second unit from DIYAutoTune. The first one failed completely due to my own mistake—I mounted it below a roof leak, and the storm water damaged the electronics. The upgrade from DIYAutoTune performed brilliantly, helping my setup make 385 hp and 425 lb-ft of torque at just 5 lbs of boost on 35” mud tires. I highly recommend these engine management systems to anyone looking for a tunable solution for small block Fords.
Great value for the money. I ordered the wire-in harness and it arrived exactly as described. It looks like it will work out really well for my build.
I was impressed with how well the MegaSquirt system fits a standard setup, especially when you don't have a factory wheel or trigger system in place. It’s incredibly adaptable and easy to mount to just about any configuration. Great choice for DIY automotive work.
Upgrading my MS1 to the MS2 on my MegaSquirt system was a breeze. The performance jump is huge, with faster processing, stepper-style IAC control, and way more trigger wheel options compared to the old 16x16 tables. Really happy with the upgrade and the quality of the parts from DIYAutoTune.com.
An essential tool for anyone installing the MS3 Pro ECU or module.
I recently picked up both the standard and extended pigtail harnesses for my MS3 and MS3x setups from DIYAutoTune. The build quality is excellent, and the convenience of not having to worry about solder cup connections makes the extra cost totally worth it for the peace of mind and reliability. Highly recommend for any Megasquirt user looking for plug-and-play convenience.
I took my time writing this to ensure I’d be completely satisfied with the purchase, and I’m glad I did. The ECU from DIYAutoTune.com handles everything I need and then some. Any minor hiccups I encountered early on were due to my own learning curve, not the hardware itself. Their technical support team has been excellent, and I’m already planning to buy another unit for a different project. This setup makes my twin turbo Zephyr perfectly manageable for daily driving while still delivering that thrilling power whenever I ask for it.
Installing the DIYAutoTune component in the US was a breeze. Just stick to the manual, add a couple of jumpers, and snap the daughter board into place. It really is that simple. The stepper IAC control is a fantastic upgrade and worth it on its own.
DIYAutoTune delivered exactly what I needed for my setup. I paired the Microsquirt transmission controller to drive solenoids at 12V rather than using a ground switch. The response time is noticeably faster than traditional relays, and the system stays cool with no heat issues. Solid performance from the guys at DIYAutoTune!
Upgrading my MS1 Extra to the MS2 Daughter Card was the best decision I could have made. The jump in resolution and available options is massive, making it a clear step up from my older V2.2 board. It installed in no time, and the performance difference is night and day. DIYAutoTune’s support is top-notch, too; the online manuals are detailed, and the forum community is incredibly helpful if you hit a snag. If you are looking to squeeze more out of your MegaSquirt setup, do not hesitate.
The barometric correction MAP sensor is an essential addition for high-boost setups. I’ve found it incredibly useful for tuning street cars here, especially with the elevation changes from our local mountains. Easily a top-tier purchase from DIYAutoTune.
I initially hesitated when I saw the price tag, but DIYAutoTune’s MegaSquirt system turned out to be the best investment I’ve made for my Ford 347 stroker build. I used to rely on Bama chips from American Muscle, but despite receiving several replacements, they just couldn't handle my setup with the forged bottom end and 36lb injectors. After some research and encouragement from friends, I finally made the switch. Installing the ECU was straightforward—I literally just swapped out the old unit and plugged it in. The real game-changer is having full control over my tuning without relying on third-party tunes that might not fit my specific needs. It does exactly what I need it to do. While the upfront cost is higher, the performance and independence are absolutely worth it.
The team at DIYAutoTune.com really knows their craft. Their attention to detail is evident even in small items; the assorted color set comes in a labeled zip-lock bag with two of each of the five colors, making organization a breeze. If they apply this same level of thought and expertise to their core products like the MegaSquirt and MS3Pro systems, the results are bound to be excellent. A great choice for anyone looking to simplify their work with high-quality automotive parts.
Upgraded my setup from the MS1 chip to the MS2 board and it completely eliminated the electronic noise and resets I was dealing with. The fix was immediate and performance is significantly improved. Thanks for the help, Matt!
La atención no fue la mejor; me avisaron tarde sobre el detalle del LS1. Desde mi perspectiva, si ya vas a hacer todas las modificaciones para eliminar el distribuidor, te conviene usar la admisión del LS1 directamente en lugar de seguir usando el TBI.
News
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
Widgets
Get the widget for your site →About Diyautotune.com
Fully assembled MegaSquirt, MS3Pro, MSPNP engine management systems, stand alone fuel injection and high performance parts for tuning your racecar!
- Website
- diyautotune.com