DuctDuck provides a logical flow for HVAC sizing calculations. The software correctly sequences Manual J through T, ensuring that load data drives the equipment and duct selections. The inclusion of standard ASHRAE equations allows for independent verification of results. The offline functionality ensures reliability in low-signal environments. While it lacks ACCA approval for permits, it serves as an efficient field estimating tool for quoting and ordering.
Questions about DuctDuck
What is DuctDuck?
DuctDuck is a mobile field estimating tool for HVAC contractors that performs residential load, equipment, airflow, and duct sizing calculations. It follows the ACCA Manual J through Manual T process in sequence, using methods such as per-room load calculations, ASHRAE equations, and the equal-friction approach for ductwork. The app calculates tonnage within a 95–115% sizing window, determines total and per-room CFM, derives Manual D friction rate from static pressure and effective length, and provides duct and register sizing.
How does the offline capability work?
The tool is designed to work offline on a phone for use in the field, making it suitable for crawlspaces and mechanical rooms where cellular signal is often unavailable. It installs to your home screen and runs with the radio off, ensuring calculations can be performed anywhere without needing an internet connection.
What are the pricing options and trial terms?
Pricing starts with a 14-day free trial followed by a subscription of $14.99 per month or $119 per year. A card is required to begin the trial, but nothing is charged until the trial ends, and you can cancel any time within those 14 days to pay nothing.
How does the calculation process work step by step?
The process walks the chain the way Manual J through T lays it out, starting with room-by-room load calculations in Quick or Detailed mode, then moving to equipment sizing, airflow, friction rate, duct sizing, and finally registers and grilles. This continuous chain ensures that changing a window updates the load, tonnage, CFM, trunk size, and register all together without retyping numbers.
What do reviewers say they like about the tool?
Some reviewers praise the ability to size a system and its ductwork in about two minutes at the truck, using the standard equal-friction method and the real ASHRAE equations. The tool is described as good enough to quote from, order from, and sanity-check someone else's numbers with.
Who is this tool best suited for, and who might find it insufficient?
The app is not ACCA-approved software and is not a substitute for a certified Manual J, S, D or T calculation performed by a qualified professional. It is specifically designed for residential scope and imperial units, focusing on field estimates rather than full certified paperwork.
How does the multi-system feature work?
The tool features two independent systems, allowing users to assign rooms to System 1 or System 2 on a multi-unit job. This lets you size each system's CFM, equipment, trunk, branches, registers, and friction separately, which is useful for complex residential projects.
How are friction rates and duct sizing determined?
For friction rate calculations, users can set it by hand or derive it from available static pressure and total effective length. The tool includes a blower-table helper and a component list for fittings so the TEL isn't a shrug, and it offers a velocity-band picker with a live equal-friction ring.
What are the differences between Quick mode and Detailed mode?
The tool offers Quick mode for a fast number using square footage, ceiling, and a per-room-type factor, or Detailed mode for a Manual J-lite component calc including walls, windows, orientation, insulation, infiltration, and internal gains. Rooms below grade use soil ΔT and slab loss and skip solar and attic gain.
How does the refund process work?
If you are charged and not satisfied, you can email [email protected] within 30 days of the charge to request a refund. The company will confirm within 2 business days and issue the refund through Stripe, which typically returns funds to your card in 5–10 business days.
How does the tool handle trunk reduction schedules?
The tool provides a trunk reduction schedule for step-downs as takeoffs drop the CFM, ensuring that the design remains accurate as the airflow requirements decrease along the duct run. This feature helps maintain proper sizing throughout the entire system.
How does the tool handle tonnage sizing warnings?
The tool calculates tonnage within a 95–115% sizing window and includes an honest warning when you are outside it. Over a single 5-ton residential system, it tells you to split the job into two units instead of quietly rounding up, which helps prevent oversized units on undersized ducts.
How does the tool assist with fitting calculations?
The tool includes a component list for fittings to help calculate total effective length (TEL) accurately, avoiding the common issue of the TEL being a shrug. This ensures that the friction rate and duct sizing are based on precise measurements rather than estimates.
How does the tool accommodate different climate conditions?
The tool allows users to set CFM-per-ton, with a default of 400 that can be dropped for humid climates. This flexibility ensures that the airflow calculations are appropriate for different environmental conditions and specific project requirements.
How can I contact DuctDuck?
You can reach DuctDuck by e-mail at support@ductduck.com.
AI-generated from reviews on this page. Verify anything important with the company directly.
What stands out most is the offline capability. DuctDuck installs directly to the home screen and runs the entire calculator without needing a signal. This is perfect for crawlspaces and mechanical rooms where connectivity is unreliable. The tool handles the whole residential design chain in the order ACCA specifies, covering load, equipment, airflow, friction rate, and duct sizing. I appreciate that changing a window updates the load, tonnage, CFM, and register sizes automatically. It eliminates the need to retyping numbers between four separate calculators. The pricing is simple, with a monthly or annual option and no upsells. The fourteen-day trial allows enough time to verify the workflow. Exporting to PDF or JSON helps with documentation. Using the standard equations means I can sanity-check the results myself. It is not a substitute for stamped Manual J software, but it is excellent for field estimating and quoting.
The interface appears clean and follows standard ASHRAE equations. It seems designed for speed rather than comprehensive certification, which suits my needs for on-the-spot calculations.
Using DuctDuck offers a streamlined approach to residential design calculations. The tool walks through the chain from load to registers in the correct order, preventing common errors like oversized units on undersized ducts. It is not ACCA-approved for stamped permits, but it serves well for quick estimates and verifying numbers from other software. The ability to work offline and sync between devices adds significant value for field technicians.
DuctDuck serves as a reliable field estimating tool for HVAC professionals. The software follows the ACCA specification order, handling load, tonnage, CFM, and duct sizing efficiently. It runs offline on mobile devices, which is crucial for basement jobs. The pricing is straightforward with no hidden upsells, making it a practical choice for daily quoting and sanity checks.
News
No news yet. This is where the business shares its own updates and press.
Photos
No photos yet. Photos shared by reviewers will show up here.
Widgets
Get the widget for your site →About DuctDuck
DuctDuck is a mobile field estimating tool for HVAC contractors that performs residential load, equipment, airflow, and duct sizing calculations. It follows the ACCA Manual J through Manual T process in sequence, using methods such as per-room load calculations, ASHRAE equations, and the equal-friction approach for ductwork. The app calculates tonnage within a 95–115% sizing window, determines total and per-room CFM, derives Manual D friction rate from static pressure and effective length, and provides duct and register sizing. It is offered on a 14-day free trial followed by a subscription of $14.99 per month or $119 per year, and is designed to work offline on a phone for use in the field.
- Website
- dansductulator.com
- support@ductduck.com
- Categories
- Computer software