Brewers hardware, inc.

I’ve never been able to get such precise control over my fermentation. Using this setup with my BCS 462 and DIY Glycol Chiller from Brewers Hardware allowed me to dial it in within just one degree. I’m definitely saving up to get another unit!

Ordered some M12 panel mount connectors from Brewers Hardware as part of a bigger batch, but the lead length was a bit of a letdown. They came in with 3-inch leads instead of the 12 inches shown in the description. That’s quite short for most setups and really restricts how you can layout your panels and components. I’ll probably have to solder on some extensions just to make them usable.

Great Tri-Clover barb fitting with fast shipping from Brewers Hardware. I really appreciated that each piece was bubble-wrapped and capped individually.

Brewers Hardware delivers exceptional value for Tri-Clover fittings. These connectors are well-made, sanitary, and visually appealing, making them a stylish addition to any brew. I couldn't find a better quality-to-price ratio for these essential brewing components.

I ordered a BCS from Brewers Hardware, Inc., and noticed they switched the wire leads to a 3-inch size with a different color scheme—using Black and White since the Red is unused. As mentioned elsewhere, if you’re mounting the BCS inside a panel enclosure, you’ll likely need to solder a wire to your setup or use longer leads if it’s located elsewhere. I’m running ethernet cable to my small panel enclosure, so it works out fine.

The 16-inch versions fit perfectly on my 14.5-gallon Blichmann Fermentors and work just as they should. It’s great to find specific gear like this at Brewers Hardware for all my brewing needs.

I’m really impressed with the quality of this thermowell from Brewers Hardware. It has a substantial, sturdy feel, and the threads are precise. The machining detail for the o-ring groove is excellent, ensuring a proper seal. It fit right into my Blichmann pot without any issues. A great find for homebrewers looking for reliable stainless steel components.

For this specific tubing, I actually found a better deal at Brewers Hardware than anywhere else. Really happy with the purchase and the quality.

Great addition to my setup. I use a custom mash tun with a removable stainless steel false bottom, and this tube does a fantastic job keeping things sanitary while ensuring I get every bit of wort out. I’m already planning to order two more from Brewers Hardware for my BK and HLT.

The updated 3-piece model from Brewers Hardware is a definite upgrade over the previous 2-piece version. It’s solidly built and makes wiring much smoother and more enjoyable.

Brewers Hardware, Inc. has a great product in this valve. It is built to last and feels very sturdy. Being able to take it apart for thorough cleaning is a huge plus that makes it worth the cost.

I used to try and improvise my own fittings, but Brewers Hardware made it so much easier with their stainless steel options. Exactly what I needed!

Brewers Hardware really delivered on their promise of quick service! I was thrilled to see my order arrive in Australia in just five days. The product itself is fantastic—it disassembles in seconds, making cleanup a breeze. The customer service team was also excellent, very helpful and attentive. Highly recommended for anyone looking for reliable brewing gear.

The 15-gallon Jacketed Fermentor from Brewers Hardware is an absolute beast. It really feels like a professional setup right in my garage here in Las Vegas. I’ve got it hooked up to a chest freezer with 45 gallons of glycol chilling at 28 degrees, and it handles fermentation and cold crashing like a champ, even when the garage hits 90 degrees. They really need to update their website with better photos because the current ones don’t do this unit justice. I’m definitely grabbing another one soon!

Solid valve for my conical fermenter. Really happy with the quality and glad I didn't cheap out. I went with the squeeze trigger model, though it seems they’ve discontinued the 2-inch version.

Brewers Hardware delivered a really solid kettle. The build quality is excellent, and the whirlpool port is a great feature that prevents hot wort aeration. The pickup tube is fantastic too. There was a small dent on the bottom, but it was there before packaging, so it wasn't damaged during shipping.

If you are looking for serious brewing gear from Brewers Hardware, this is it. The fermenter is built like a tank—maybe a bit heavy, but that just proves how solid the construction is. Compared to my Blichmann unit, I actually prefer this one. It is designed for gravity drainage with a sensible height, features a wider port for easier yeast removal, and includes a superior racking arm. Plus, having the thermowell and glycol jacket pre-installed is a huge plus. Everything feels well-made, and I have no complaints at all.

Brewers Hardware delivered this CIP ball quickly. It made quick work of cleaning my Brewhemoth conical in just a few minutes.

Fast shipping from Brewers Hardware—I placed my order on Monday and received it by Thursday. I do have a question about CIP pumps: my 1/2" CIP ball spins wildly, but the one I bought from the store rotates very slowly. Does anyone know which pump works best with this specific part?

Just got this fitting delivered and it’s perfect for my RIMS setup. The quality is outstanding—absolutely no scratches—and it arrived in excellent packaging. I’m just starting out with building my own brewery, so I’ll definitely be ordering four more of these plus a few other accessories from Brewers Hardware soon. Cheers!

Great quality product from Brewers Hardware, but I’m looking for a replacement O-ring. Can you help me out?

Hands down the gold standard for brewing components. It’s a marvel of precision engineering. I actually returned a comparable item from another supplier on the exact same day I ordered this one. Derrin’s offerings from Brewers Hardware are truly in a league of their own.

Really well-made piece from Brewers Hardware. It’s heavy-duty and built to last. There is ample space inside for routing a good amount of wire.

Adding a few of these diverter valves to my brewing setup at Brewers Hardware has totally changed the game. Now I can go from vorlauf to BK transfer and fly sparge just by switching two valves. If you want to brew faster and more efficiently, these are an absolute must-have.

Brewers Hardware delivered exactly what I needed. The quality is superb, the price is fair, and their support team was incredibly helpful. After over a year of searching for the right conical, I’m thrilled with this choice.

Got this MLT from Brewers Hardware with custom fittings exactly to my specs. Really impressed with the quality. Would love to see more photos of the false bottom and pickup tube in action.

I placed my order for this Brewer Hardware element on a Thursday night and it arrived by Monday afternoon, which is excellent for standard shipping. The unit looks fantastic, and the included accessories are just as well-made. It feels incredibly substantial in your hands—you can really tell it’s built to last. With the 240V 5500 ULWD fold-back design, it offers plenty of surface area for effective brewing.

Found exactly what I needed for my boil kettle. This Tri-Clover fitting from Brewers Hardware is solidly built and matches my 1.5" ferrule perfectly. Quality hardware at a good price.

I’ve got three of these units with NG orifices in my setup from Brewers Hardware, and I’m really happy with them. Unlike the noisy jet tip burners, these run practically silent—you almost have to double-check to make sure they’re actually on. They also offer great versatility; I can dial them down low for mashing or crank up the heat for a rolling boil if you’ve got good ventilation. Plus, the larger diameter ensures much more even heat distribution across the kettle bottom. A quick tip: pick up the burner shield mounts sold by Brewers Hardware or build your own, since wind can definitely affect the flame.

Brewers Hardware has delivered another top-notch component that lives up to their reputation. I truly believe no one else manufactures these to the same standard. The attention to detail is impressive, particularly how the nut faces are machined to properly seat the O-ring. One detail worth noting for installers: the kettle or fermenter itself doesn’t need internal threads because the O-ring on the thermowell’s inner face creates the seal. It’s a rare find to see a sanitary weldless thermowell like this available off the shelf, making it ideal for fermentation setups. It feels rugged enough to withstand a mash paddle strike and promises to last a lifetime. A simple hand-tighten is all it takes to get a perfect, leak-free fit.

I’m really impressed with the quality of the kettle I ordered from Brewers Hardware. It arrived in pristine condition with absolutely no manufacturing defects. I added a 1.5" Tri Clover fitting at the 1:30 position for my element, and the on-site welding they did was even cleaner than what you get from the factory. Overall, I’m very satisfied with this purchase.

Brewers Hardware is the place to go for high-quality brewing gear. I ordered a valve specifically for the output of my Chugger pump to manage RIMS flow rates, and it works perfectly. It is highly efficient and super easy to clean.

Got my kettle finally, though it took eight weeks to arrive. Still, it’s absolutely top-notch—exactly the kind of quality I’ve come to expect from Brewers Hardware, Inc. Can’t wait to put it to the test and share how it performs in my next brew.

Brewers Hardware is the real deal for anyone serious about their gear. I’ve put their setup through five brewing cycles now, and it’s made cleanup a breeze. Tearing it down and getting it into PBW takes seconds. The quality is top-notch.

I upgraded to the 2-inch setup after starting with the 1.5-inch system, and Brewers Hardware made the return process smooth and hassle-free. For 120V users, the smaller unit is sufficient, but if you are running a 5500W element on 230V/30A, the 2-inch version is a must to prevent tube boiling. The larger volume helps dissipate that massive heat load. Keep in mind you don’t need this much power for standard mash recirculation or sparging unless you are using the RIMS tube as a high-power heater to bring cold water up to temperature. Sourcing water from your HLT into your MLT significantly reduces power demands. I’m currently using this in 10-gallon electric kettles for 5-gallon batches, so the setup is a bit overkill, but I’m preparing for a future brewery pilot system. My build includes a 2-inch RIMS tube, element holder, various Triclamp fittings (including 1/2-inch NPT caps and 90-degree barb caps), and mounting clamps sourced directly from Brewers Hardware. I paired it with a ULWD element, 10-3 power cable, and a 220V locking connector from a local store, plus a 6-inch PT100 thermoprobe from Auber Instruments. The tube performs exceptionally well, and the team at Brewers Hardware was great to deal with. One important safety tip: double-check your ground screw. Mine loosened due to tolerances and slipped, which is easy to fix with new hardware, but it’s a serious hazard if overlooked.

🍻 Great selection of brewing equipment and accessories. The website is easy to navigate and has detailed product descriptions. Prices are on par with other online retailers. Average customer service, could be more responsive. Overall, a reliable option for homebrewers.

👍👍 I am extremely satisfied with my purchase from brewershardware.com. The products are excellent and the customer service is outstanding. I had a few questions before making my purchase and the support team was very helpful. Highly recommend!

The customer service team at Brewers Hardware, Inc. is very knowledgeable and responsive. They helped me find the right products for my brewing setup and answered all my questions promptly. I'm extremely satisfied with my purchase and the overall experience.

I recently made a purchase from brewershardware.com and I'm very impressed with the quality of the products. The website is user-friendly and the ordering process was smooth. I received my order quickly and everything was well-packaged. Definitely recommend!

I recently ordered some brewing equipment from brewershardware.com and I am very impressed with the quality and functionality of the products. The prices are also reasonable compared to other online retailers. I would definitely recommend them to anyone in need of brewing supplies.

👌The customer service at Brewers Hardware, Inc. is second to none. They go above and beyond to ensure customer satisfaction. The products I ordered were of top quality and arrived in perfect condition. Will absolutely be ordering from them again!

The customer service at Brewers Hardware, Inc. is excellent. They are always helpful and responsive to any questions or concerns. I have made several purchases from their website and have always been satisfied with the quality of their products. I highly recommend them!

👍 Ordered from brewershardware.com and I'm extremely happy with my purchase! The products are top-notch and the customer service is excellent. The website is easy to navigate and the shipping was fast. Will definitely be a repeat customer!

I recently bought some brewing equipment from brewershardware.com and I couldn't be happier with my purchase. The products are high-quality and the shipping was fast. The customer service team was also helpful when I had questions. Highly recommend!

I’ve been using valves from Brewers Hardware and they are fantastic—super easy to clean. I know some folks complain about leaks, but I haven’t had any issues. Definitely worth it, especially since they offer much better flow control than butterfly valves and are a breeze to maintain compared to standard ball valves.

I’m really pleased with the 1-inch three-piece ball valves. It’s great that they are easy to disassemble for cleaning, and the price is very reasonable. Brewers Hardware also happened to have the specific gaskets I needed, which was a huge plus. Thanks for the help!

I’m really impressed with this item from Brewers Hardware. It has a distinct, instrument-like design that looks great. I installed a sight glass on the output and switched to cam fittings for a better seal. I’ve used it for both heating strike water and maintaining mash temperature with a Blichmann 240 Brew Commander and a 5500W foldback element. The element adapter is well-made. I found that dropping the power below 50% during recirculation works perfectly. I ended up mounting mine horizontally.

Brewers Hardware truly delivers on quality, service, and shipping.

Brewers Hardware continues to deliver top-notch quality and outstanding service. My order arrived exactly as promised, making the whole experience seamless.

I’m really impressed with the quality of the fermenter lid I ordered from Brewers Hardware. It feels incredibly solid, almost like a heavy-duty submarine bulkhead, with excellent fit and finish. I’m using it on a Sanke keg that had an 8-inch ferrule welded on locally by precision welding specialists. The staff there were genuinely surprised by how affordable the price was for such high-quality material. It has made cleaning the keg so much easier!

I recently bought eight of these from Brewers Hardware and was pleased to see that the cables were extended to over 12 inches, matching the photos. My current batch actually features even longer leads at 19-20 inches. It’s a nice improvement over the 3-inch versions I ordered back in 2017, which were noted by other reviewers at the time. Regardless of the length changes, the connectors remain high-quality, and the prices are still much more competitive than what I’ve found elsewhere. Solid 5 stars.

I’ve recently added a second unit to my setup with a 2nd SS Brewtech BrewBucket fermenter. I simply drilled a half-inch hole in the center of the lid, and now I can accurately monitor wort temperature right from the middle of the vessel using my Inkbird controller. It’s a perfect solution.

At Brewers Hardware, Inc., we rely on these valves in our brew house, and their design makes cleaning a breeze. Unlike some of the bulkier options from competitors like Blichman, these are far easier to take apart and maintain. They are simply the best we have found on the market.

I’m fairly happy with this valve from Brewers Hardware, though it’s not without its quirks. The body comes apart in a flash, even if wrestling with the handle takes a bit more effort. One thing to note: you don’t actually need to remove the handle just to clean the valve, a detail I learned the hard way. I’m giving this four stars because the ball passage is just a hair under 1.5 inches, which means some liquid tends to stay trapped in the attached tubing. Also, keep in mind that if the valve is only partially open, some liquid or particles can end up between the ball and the body—this is just a trade-off of their quick-clean design. It’s a reminder that you should fully disassemble the valve for cleaning after every use, rather than just running a brush through it when it’s open. On the plus side, thanks to the thoughtful design from Brewers Hardware, the disassembly process itself is incredibly straightforward.

Expensive, but if you need a sanitary pressure gauge for your fermenter, Brewers Hardware is the best choice. The quality is exactly what you expect from them. It comes in a styrofoam case for protection, though I wish it had a more durable case for long-term use.

I’m using these fittings on the intake and outlet of a 1HP Wayne Spring pump for my CIP setup, and they perform exactly as they should. It is great to find high-quality sanitary hardware at Brewers Hardware, especially for specific brewing applications like this.

I bought a kettle from Brewers Hardware based on the specs—specifically the wall thickness and 1.5-inch tri-clamp fittings—which seemed ideal for a pilot setup where keeping industry-standard hardware saves you a headache with gaskets later. But in practice, the experience fell short. When it arrived, the false bottom was loose enough to rattle around during shipping. Worse, trying to get it out left deep grooves and scratches on the interior walls; it’s clear that any friction during insertion or removal will damage the metal. I actually have two units, using one as a mash tun and the other for boiling, and the boil kettle’s bottom has warped significantly. They don’t sit level anymore, and the lids won’t close properly. For the price, I’d recommend looking elsewhere. I eventually switched to a different brand with volume markings, a jacketed bottom, and a V-wire screen. Having bought quite a bit of gear from Brewers Hardware and spoken with Wil and Curtis a few times, I felt my concerns about these manufacturing defects were met with a lack of real concern. Ultimately, the equipment didn’t live up to expectations.

This valve from Brewers Hardware performs exactly as promised. I use it on the outlet of my chugger pump, and it regulates flow with precision. After seeing how fast a standard three-piece ball valve gets gunked up, I’ve decided to swap out all my existing valves for this design. The ability to quickly disassemble, clean, and reassemble makes it a fantastic upgrade for any home brewer.